Search results for query: *

My cable for brake distribution block is missing. What is the routing of this cable, I assume it ends up at the brake light switch and what does this thing actually do.

Anyone know what these button like connectors are called. Need to find some and dont know what they are described as. Copper thing im talking about not the whole socket.

I have swapped my 3 spd wiper motor to a 2 spd on my 73 Duster so it wont interfere with Distributor. If I now buy a 2 spd switch is there a harness I can purchase to simply plug it all in or will I have to wire it. Not very good with wiring so prefer the harness option if available.

Hooked up a MSD 6AL to my Duster but left the Tach hooked up thru the coil. The needle now goes crazy jumping around. Does the wire that goes from tach to the coil now get disconnected and hooked to the grey coming from the 6AL. Just want to make sure.

I am having trouble with my NSS. I had nothing when turning key. Disconnected wiring at switch and then It turned over. Removed harness and checked connections and everything fine. Plugged it all back in and nothing. I suspect the problem is further down the line in the column. Any...

I know this has probably been covered before but I need confirmation I am doing the correct thing. Can I just join all these wires together along with the Red from the MSD box. I am fecking hopeless with wiring and dont want any damage as I have screwed up a Ready to Run before. Before...

1) Is it OK to run my ground strap to Aluminium head or does it have to go on engine block somewhere. I also have a 1 wire alternator and they say to have a good ground to block. 2) My original braided ground strap is stuffed. Can I replace it with a piece of battery cable.

1973 Duster I want to wire my MSD E Curve but leave all the factory wiring there. What would I have to unhook/disable in order to make this work. Top diagram applies to me - no MSD Controller Attached MSD Wiring diagram

Pulled my steering column out and the electrical connectors are junked. It was held together with a rubber band and electrical tape. Can i buy these anywhere or do i have to rewire the whole lot with different connectors.

Hi What Coil are you running with your E Curve? I have a digital E curve for my 360 I have an old MSD Blaster 2 P/N 8200 that I had lying around. There is a Blaster 3 P/N 8223 but I cant see much difference between both the coils.

Has anyone bought a 1973 engine harness. Classic industries sell up to 1972 and I'm thinking I could use this one. Has anyone bought I specific 1973 one and from where.

If I have my front indicators/turn signal lights on and then I pull the parking lights on the turn signal goes out. Is this a grounding problem? and if so how are the lights grounded in a plastic grille.