Search results for query: *

Looking for original bolts and washers and ignition wire looms etc. Engine is a 383. I think that many bolts from most v8’s may interchange. Wanted in nice shape nothing bent or stripped. Most importantly looking for head bolts, intake bolts, water pump bolts, alternator brackets, spacers...

I’m looking for the 4 factory nuts that hold the round mounting bracket to the blower motor on the firewall.

Looking for a used timing cover that is in decent shape. No bent up covers. I need a replacement for my 67 dart B engine and looking for one with a nice flat straight bottom edge. The timing marker is on the left if looking at the cover. What have you got. Thanks

I’m looking for screw in valve cover studs for my 383 engine. I’m putting my engine back together and the flat head screw in valve cover studs make it nice and easy to set valve cover. They were on the car when I got it so I don’t know if these were ever OEM? They are 1/4-20 thread count and 1...

I’m in the process of topping of my Eddie performer rpm heads on my 383 with my Harland sharp shaft type using the geometry kit from Mike at B3 racing engines. He is a super nice guy and educated me on what adjustments to my rocker shafts would be needed to optimize geometry. I switched over...

Looking for 4 bleeder screws for my front KH disk brakes on my 67 Dart and Barracuda. See pic below.

I have heard horror stories about how bad repo gas sending units are. Therefore, I'm looking for a good used or nos gas gauge sending unit that is compatable for my 67 Dart. Best case scenario is buying an nos unit or if not then a good used one that can be rebuilt. Carl

I'm looking for a set of the brackets that bolt to the back side of the Kelsey's Hayes front disk brakes and secure the front brake hose to the steel Caliper brake line. I think there is a right and left or maybe they are universal not sure. I have attached a picture to show what I need. It is...

Im looking for the mounting support bracket that holds the steering column to the dash frame. A plus would be if I could also get the collapsable plastic clips that slide into the bracket. Carl

Looking for an overcenter spring that would be compatible for the new clutch pedal setup I'm putting in my 67 383 4 speed dart. Just curious is the spring specific to a BB 4 speed clutch setup as compared to SB or slant 6? Carl

Looking for an upgrade on my original motor 1967 383 4 speed barracuda. Hoping I can just rebuild bolt on and go. Maybe give me a little more performance than my 383 Carter 4298s. Carl

I'm looking for the drivers and passengers side vent window frames that are chrome and hold the swiveling glass windows. Looking for nice ones not pitted that I can clean up. I'm not sure if the convertible window frames are the same as the fastbacks or notchbacks? I'll pay a premium for a...

Looking for a water pump housing with the casting # 2780987 dated before 4 17 67 build date of my BB barracuda. Not sure if the year is part of the date. If not then before just 4 17 for the date. I need one that isn't broken or cracked. What have you got? Thanks Carl

Looking for good used headlight adjusters for the front headlights on my 67 barracuda. I believe there are 2 per headlight so I need 4. Looking for the correct ones for my car. I'm trying to keep everything correct and don't know if they were different year to year? Shipping is to CT zip...

Looking for 4 old school keystone klassic center caps for my 14 x 6 SBP rims. Prefer ones in nice shape not cracked or pitted. PM me with what you have. Thanks Carl

Looking for 2 nice headlight dash pull knobs with shaft attached. Need one for 67 dart and one for 67 barracuda. Prefer knobs in nice shape not pitted or rusted. Live in Danbury CT 06810. Carl

I'm looking for set of 4 old school SBP Keystone Klassic Rims. Looking to put them on my 67 GTS. What sizes do you have? 14 x 6, 15 x 7 it's all good. The nicer they are the better but willing to look at almost an condition just not with broken centers or cracked lug holes. I have cash in...

I thought I would ask the community for their opinion. I'm looking for a manual steering box that was built before 4/19/67. That is the build date of my car. I'm considering a couple of options. A 20:1 ratio or 1:16 ratio box is something that Im considering and can be rebuilt by firm feel...

Looking for a used steering coupler that will fit my 67 dart which has manual column with 4 on the floor. The reason I'm looking for a used one is because ordered a new replacement coupler and doesn't fit shaft coming off of manual steering box. I thought that one pulled off of a car will most...

If there is any chance of finding what I need I figured it would be here. I'm looking for 4 rims small bolt pattern Keystone Klassics. This size bolt pattern is no longer made so I can't buy new. Must be at least 14" high prefer 6" or 7" wide. I don't care if the rims are pitted stained or...

Looking for a steering coupler that is correct for my car. I have a 67 dart manual steering with floor manual trans. My old coupler has been beat on and dinged one two many times. Looking for one in nice shape so when re-installed my coupler top cover will fit correct. What have you got? Carl

Looking for 2 choke adjustment screws that would work on my 67 dart and barracuda. Both for 67 383 manual tranny cars. I believe the correct carb is a Carter 525 CFM model 4298S. I don't know if the adjustment screws worked universal across most Carter carbs? Looking for screws that are in...

Looking for the three dash switch bezels headlight, hazard, and wiper switch. Looking for NOS or real nice used original no pitting or chipped chrome. Will pay for nice bezels. What have you got? Carl

I'm looking for the 3 screw on round dash bezels that screw onto the accessory switches on dash hazards wiper etc. Looking for the bezels to be really nice not pitted or scratched the ones on the car are pitted. Also looking for floor mounting plate that secures steering column to firewall. My...

Looking for the socket that holds the bulb that sits in the dash cluster behind the brake warning light. Mine is worn out and wont stay in position.

Looking for the plastic bearing that goes into the bottom of a 67 dart manual trans steering column. Pic included.

I'm looking for a 67 factory not repo rally dash tach that was in the center pod. Keep in mind 67 tach was different than the 68 or 69. The 67 ran from say 8 o'clock to 5 o'clock and went to 6 grand. The 68 and 69 went from 5 o'clock to 1 o'clock. I'll take anything from complete but needs...

Looking for a correct 67 starter motor either rebuilt or can need a rebuild. Going into my 67 GTS so want build date to match. Must be before April 19th. What do you have? Located in CT 06810. Carl

Looking for the interior chrome windshield trim for my 67 conv barracuda. Looking for pieces either in nice original shape or good candidates for restoration. I need the right and left sides as well as the trim across the top. I would also be interested in a nice rear view mirror and base. I...

Looking for a nice original working gas gauge for a 67 barracuda. Doesn't have to be NOS but in nice shape and functioning. Carl