Search results for query: *

First trip around the block. Tomorrow morning it`s heading out to Ken Dondero`s shop for the tune up. Then Famoso this weekend!! Please let me know if the video is working. Thanks <iframe src="https://www.facebook.com/video/embed?video_id=606988522644968" width="1280" height="720"...

Finally got the 360 in today. Not running yet. I still have to hook up a few more things. Planning on being at MATS!! (I know the engine bay is black, it`s a race car) I got the torque conv. amd flex plate issues worked out. The Hooker 5204`s are a tight fit, but they fit!!

We are finally ready to install the 360 in the 71 Dart 1973 360 .30 over KB 191 @ 12 to 1 J heads 2.02 / 1.60 Zero decked Ported, Polished all that good stuff Gasket matched 273 Rockers 1.5 Comp XE285 HL (going to probably end up needing more cam) Mopar M1 manifold Holley 750 2 inch carb plate...

Well, my new engine arrived today!!!

I saw these on a post. Is anyone using the Hooker 5204 Headers, and if so how well do they fit on an "A" body. Thanks

Please post some pictures of how you have mounted your seat belts to the floorboard in your race car. Are you using the factory mounting bolts or fabricating your own? Thanks in advance!!!

About 10 minutes ago at the Street Car Super Nationals, Sean Renteria ran a 5.925 at 250.92 and lost!! His fastest run ever. That little 4 door 1965 Plymouth Valiant flys!!!

I rec`d this email. What do my fellow FABO members think of this build? "360 Mopar is a great engine. Most underrated by folks. Get the compression up over 10 to 1 .Kb are good if you look after the extra end gap for the hypereutectic material. Error on the large end. clearance as for marine...

Looking for ideas on how I should have the front end aligned on the Dart. The picture shows the car at launch. Any suggestions on settings when using 90/10 shocks? There is a good post on FABO about this , but I cannot find it.

I am bragging on my son. Today was his first time behind the wheel of the Dart. He ran the Summit Series at Famoso. Time trialed with back to back 13.88`s. The in first round he got lined up against a new ZR1 Corvette. Well his day ended there. But I am one proud Papa!!!

Looking for some advice on a torque convertor. I am running a 904 with 3.91 gears and a 318. 26 9.5 14 Hoosiers. What stall should I run with the cam listed below. This is a drag car only. Brand COMP Cams Manufacturer's Part NumberK20-222-3Part TypeCamshaft and Lifter KitsProduct...

Any FABO members going to the March Meets? :burnout:

Heading to Famoso in the morning for the first Test & Tune. Hoping to get my little 318 down to a 12.99. It could happen!!!

How do you know what these are set at? Is the first click you here the 90/10 setting on the front? Trying to get these installed tonight.

Does anyone have any pictures or suggestions on how to mount a Kirkey seat in a 71 Dart. Any help would be appreciated.

Picked up my roll bar today from Kyle. Top notch craftsmanship. Once I have it installed in my Dart. I will post pictures.

:burnout: Looking for input on what tire to use. Currently running 26 9.50 14 with 3.91`s. Going to a 15 x 8 wheel. I have had a 27 10.5 15 on before with a 15 x 8 wheel with 3.75 back space. Very tight fit. SS springs in stock location. Inner fender lip is rolled. 318 with 904 running 13.5 with...

Twice today while I was launching from the line, my trunk flew open. At first I was stumped. Then it clicked. My 60 foot times have gone from 2.06 to 1.90. I have yet to put sub frame connectors on this car. I think when I launch the car is twisting and allowing the trunk to open. I could be...

Any FABO members going to the March Meets ?