Search results for query: *

I am doing the BBP swap on Nikkis 66 and I borrowed the socket for the balljoint and the tool for the upper a arm bushings. I will say right now that if you are going to do this job you need these tools! I removed and installed both upper balljoints and all 4 bushings in about 10 minutes! The...

Just wondering if anyone has done the swap and NOT changed the driveshaft. I have been hearing from guys that say "It's no problem" and others that say "oh god, your going to die if you don't change the driveshaft". What about changing the drive shaft but not right away, how long before anything...

I liked the feel of the shocks on the 66 so I got a new pair of Comp Engineering drag shocks for the front end of the 73 but I'm having problems adjusting the little bastards. The ones on the 66 have the stock markings of XF F R and click each time I turn them past the letters..."click...

Who is running them on a stock driver, too much, acceptable? I know someone who lives pretty close to me and has a new set of Comp. Engineering 3 way adj. front shocks and the 66 Dart needs new shocks.

Are there C-clips that hold the axles in place or are they like a 8 3/4 and you just unbolt the end plates and then use a slide hammer? I thought there were C-clips but I can't remember and the shop manual doesn't show or mention anything about them.

Did any of the Volaries come with a tilt column? What about a tilt column with no shifter on it?

Im trying to decide what shocks I want to get for the dart. Here is what Im working with... 73 Dart custom 4 door 225 with a 1bbl, auto, 7 1/4. This car is a all original driver in tits on perfect shape. Im trying to decide on one of the bottom 2 on the link for the rears and for the...

73-76, Does the arch in the center of the bar face up(peek at the top) or down (like a U shape)or does it matter?

I got a Addico sway bar for a 73-76 that Im going to install on my 73 scamp but mine never came with one so I am going to make some tabs to weld onto my LCA's. What are the measurements of the stock tabs and arent they welded on at a slight angle, anyone have some pics?

Just wondering on average how long a set of front kyb shocks last. Mine are about 2 years old and they are junk now.

We ordered the super frontend rebuild kit from PST for my girlfriends 72 scamp, all rubber bushings. So far the kit is great but the only thing that Im wondering about is the strut rod bushings. http://pg.photos.yahoo.com/ph/scamp_of_doom_73/album?.dir=/3f84scd Does that look like the...

http://www.partsamerica.com/ProductDetail.aspx?mfrcode=LRS&mfrpartnumber=1030&parttype=255&ptset=A We need one for my girlfriends 72 scamp but cant find a good used one that anyone is willing to part with and it's cheaper than flaming river.

I got the rebuild kit for my power steering pump, got the pump all apart, realized that it was going to be much easyer than I thought it would be, knocked out the old shaft bushing, went to install the new bushing....and mangeled the living **** out of it. So the question of the day is, What...

Anyone know the part number for the little rubber O ring seal that pops in the back of the power steering pump from a 73 scamp. Its about the size of a penny and fits in the threaded hole for the hose and if I rember it has some grooves in it.