Search results for query: *

Im excited that iam down to 3 things to get done and the Dart goes in for safety. All i can do but iam having a flickin hard time figuring out the reverse lights. 67 Dart , 1973 318/904 auto. in it. Everything works on the car except the reverse lamps.Iam electrically stupid in alot of ways.This...

I have a 67 Dart with a 2 speed wiper motor. Unfortunately it gave up the ghost. A buddy of mine dropped off a 2 speed but not from a 67. Dose this matter? are they year specific? I tried it out and got it to work on one speed but i hear a click noise coming from the switch then nothing until i...

Hello all. A quick and im sure a easy question for most. I have a after market alt/volt gauge i want to install. 2 wires Equus guage set up. What is the easiest way to hook up the wires? I know one is grnd but any ideas for a almost idiot?????????? No instructions at all with guage. Looked it up...

I have the 2 speed wiper motor in my 67 Dart. All wiring is good checked the harnesses and to switch all seems fine. I turn on switch nothing 2nd speed nothing but when i turn it to the off position it runs............Puzzled. All wiring seems to corispond with colour coded wires. Just stumped...

Well im getting everything working again, I have Headlamps, high and low, marker lamps ([park), signals,brake lamps tail lamps. All outside great. Inside with the key on red lamp (oil) on with key.Perfect....But nothing else. No lamps on cluster on except the red lamp oil ind. The new headlamp...

As some of you know im real close on gettin my Dart fired up. Been along time..Excited:cheers:I have a 67 Dart. I have all the plug in style wiring in. I have a red and black wire eye style ends and havent a clue on were they go.....i was thinking alt guage but not sure also is there any other...

I have been working on the dart a bit lately, back permitting. Im having a hell of a time to roll the motor over.318 904 auto its not siezed new elec.components and rebuilt starter. Starter isn't ingauging. I think I may have put on a 6cyl 904 torque converter................Will this make a...

Im looking for some help in regards to the 3 wires that come off the Neutral safety switch at the trans.(904) 3 wires. I believe the brown/yellow stripe goes to starter relay but were do the 2 others go? Thanks in advance. BTW i have a great wiring diagram but it dosent show anything at the switch

Im going to try and hook up my wiring myself. Im really puzzled on doing it. Its a 318 auto going with the electronic set up. I have a good diagram for the orig. set up points but i have no clue on routing wires to the ign. module/ballast ect. Anyone have a easy diagram to do this that even i...

Ive mounted my new starter relay and im sure were all the wires go but one. Its the grey wire that comes up from the starter. Small red goes to relay main red to battery but were does the grey one go? Is it a ground? Does it go to the relay as well? Sorry if its not a great question, just dont...

Im feeling somewhat better and getting small stuff done.Makes me feel good working on the Dart again. Im cuorious if there are better places to mount your Elect. Ign. Components. I have them just sitting in spots and im unsure if it really matters were they go. Thanks in advance.........Get them...

Im getting the odd and ends needed to start up my Dart soon. 67 Dart with a 318, elect. ignition. I have complete distributor, ECM, Ballast. I would like to know what is a good Volt reg. to get for it.Is there better and bad?????? Its a daily driver and 318 stock with 4bbl. any advice on this...

I have heard alot about these but dont know much about them.From what i understand they come out of a Dakota/Durrango with a 318 /360 engine. Is this correct? are they year specific? I would like to get one but want to make sure i get the correct one. I have a 1973 318 Thanks of course to you...

Hey all. I was going through some stuff the other day to get ready to install in my Dart. I have a problem with my Dash cluster. On the back side im missing pins. I have some but not attached. Can you solder these? Do i need new plastic circ boards with the pins? Can you get them? Thanks.

Hello all. I have a pic of what i have in regards to elect./ign. I have a new starter relay and horn relay and a 2 prong ballast and a 4 prong ballast not in pis. Am i missing anything? Thanks everyone. Were do you place your stuff.IE: fire wall?

Hey all. Being real new at all this i need some help. I have a electronic ign. set up that i want to install. Placement of everything i need.Its a small block in a 67 dart. Were do you guys/gals have everything placed. Pics of distrib. with cap off to the wiring to module and all would be MOST...

Hey all. My car and motor was apart when i got it. I have been trying to get it together and im stumped with the alt brackets. I ve searched and it seems to go one way. Is this correct or am i missing something or have the wrong parts.Of course many thanks

Hello all. Yes its the newbie with lack of knowledge again..........I have a 67 Dart. I was a bit bored and it was cold out so i brought a few items in the house to tinker with. I decided to tackle the wiring harness for the engine compartment...........Approx. 1 hour later of untangling the...