Search results for query: *

i went to power kelsey hayes breaks all new master is 1 and 8TH bore new booster bought as kit from right stuff all new lines every thing bleed breaks fire car up started going thru check list on every thing sense whole car is fresh noticed pedal is nice and high but seems a bit stiff and...

http://www.yearone.com/yodnn/tech/TechFAQ/WheelsTiresBrakesFAQ/MoparBrakeLinesValves/tabid/422/Default.aspx

Ive done the swap now just doing final work on it all i need a vacuum point for the booster i have a CALI carb on my car sense thats were it came from only two vacuum points one small one for the dizzy and one large one witch is where the pcv is hooked up i was thinking if i tee into that would...

i really need a good number for the front rubber lines no one seems to have any ideal what im talking about at the stores no listings and ive called some of the bigger brake swap companys and there no help can any one please give me a good number on lines they know work and i could use a...

68 dart had 10" drums im in the middel of a break swap i went to install front lower ball joints and the disk break bolts do not go thru the ball joints drum break ones are smaller and fit thru ball joint but are to small for spindel i was going to reuse my drum ball joints i was told there...

is there a number some one has for the hard ware kit with upper retaining plates and bolts or a used set thanks

i got 4 different prices from them on the same part with in one week and there not really trying to make a sale when they want 100$ MORE for the same part as classic. they dont really want to work with anyone seems like and im placing a 500 to 600 order and there to busy to work with me ive...

going power disc on my 68 that was man drum i know i need a prop valve from a disc break car but ive been finding them with the prop valve and a second smaller one inline does and one know about what valve i need both or just the distributing valve/prop valve thanks

so i bought disc breaks was told off a a body but i cannot find this style rotor there all just listing a knock off style not one with a hub inless im suppose to knock off my rotor and install on my old hub any one got some part numbers or info on what to do thanks

so im converting my car from man breaks to power disc i bought fire wall mounting bracket from the guy at sweet water on here bought booster and master from auto zone guy who i got all the breaks from said get a booster from a 76 it works just fine no problems well the fire wall mounting...

i need all the part numbers 4 piston K/H napa does not have a book for 68 need rotor numbers bearing and seal numbers rubber break line numbers and numbers you can think of for break system thanks

ok so im going from man drum to power disc have my front spindels rotors calipers dust sheilds just ordered my new master with booster i went with one from a 76 even thou i have a 68 every one says they work better plus no one can order the small one comes with the 15/16th bore. what i need...