Search results for query: *

Hello. I was thinking of buying polylocs for my engine. But do I need to buy the transmission mount as well? I have heard that on chevys you will brake the transmission house if you use stiff motor mounts and standard rubber mount on the transmission. Hope somebody has an answer. Thanks Daniel

Which roller rockers are you using with your hughes hydraulic roller lifters? The angle of the pushrod becomes a bit lop-sided with hughes hydraulic roller lifters. So the best would be a offset rocker for the intake. but I haven´t found any. grateful for answers Thanks Daniel

Hello. My rod bearing clearnce is 0,0015. What i have read it should be 0,002-0,003. But i thought i would ask you guys first. It is a stroker 408 with a Forged scat crank and rods. I bought it as a rotating kit with bearings and everything. Thanks Daniel

Looking for a roller to my 408 stroker. So which camshaft are you using in your strokers?

hello guys! I´m starting to go crazy about this with hyd roller lifters. Which lifter can I use in my LA block witout any modifications? Is it just hughes lifters or does howards retrofit lifters work? I also have J heads. Is it possible to get it to work with the pushrod angle that comes with...

I need a new Water pump!! which one should i buy???

hello guys! I´m going to buy a roller camshaft and lifter this winter. So which is the best brand on roller camshafts?`Is hughes engines good stuff? Thanks!

hello! I have problem with my 408. It breathes very much smoke from the air breather filters? There is one thing that bothers me, it is that i have very high oil pressure. At idle the cauge shows 50psi and at 6000rpm its around 95 to 100 psi. Thanks Daniel

Hello guys! Which plug wires are you using on your engines? The engine is a 408 with msd ignition. thanks Daniel

hello! I have problems with my engine, a mopar 408. In first gear it works up to 6000rpm then it starts popping in the exhaust, in 2nd gear it will go to 5300rpm then it starts popping. First i thought it was the the lifters that pumped up so the valves were floating, but it was not. Then i saw...