Search results for query: *

Does anyone have their oil accumulator located close to the driver seat? And does NHRA have rules about it?

A lot of old timer's in the sport claim that equal length spark plug wires do make a difference in performance. I can't see it. Opinions? Any dyno tuners out there ever test this?

Indy Mega block - no lifter oiling? My new aluminum block has no lifter oiling. Before calling them and looking stupid, does anyone know if this is correct?

The car currently has 1 3/4 hoop, door bars and rear down bars. I want to add a roof hoop and A pillar down bars. Can I use 1 5/8" DOM for the add on's.?

What line pressure are you 8 second 1/4 mile racers running in you 727?

Any drag strips south of Atco in New Jersey?

I will be running a manual valve bodied automatic transmission that will be shifted first to second thru a RPM module to an electric solenoid in the shifter. Is this set-up considered "electronics" class?

What is the largest diameter push rod that can be used in a factory 426 Hemi head? Manton offers 3/8, 7/16 and 1/2 inch.

What transmissions are the modern day Super Stock Hemi cars using and are they streetable?

How do the wrist pins get oiled when using aftermarket rods without oil squirt holes?

I am working on a big block using an aftermarket stroker crank with large/wide radius's on the rod journals. I am told I must clearance the bearings by grinding etc.. How do you guys take material off the side of the bearing? Do they make special bearings for this?

What is the best timing chain I can use at any cost?

Will a MSD 6AL work with a stock Mopar electronic (1974) distributor or will a MSD distributor work with a orange box?

I would like to gather as much info on crankshaft balancing as possible before I drop off my short block internals, so I don't look like an idiot if asked any questions by the machinist. 1-What parts do I bring with me and does the dampner, keyway, and lower chain sprocket need to be installed...