Search results for query: *

I finally found some molded hoses that work with a little trimming for the 440 in my Demon. I'm running a Champion radiator CC375 26" radiator. For the upper I'm using a gates 20630 for a 69 Charger 440 with extra cooling. With a little trimming it fits pretty well. The lower I found a GoodYear...

I need some input. I'm about ready to start getting the rest of the parts for my brake system together. I'm putting a 440 into my 71 Demon, going to be manual brakes with the later model master cylinder. Running a solid roller cam. I have to use the master cylinder adapter and with having to...

Just for giggles I wanted to put this out there. The 440 MRL built for me. RPM intake Eddy Rpm heads aluminum water pump housing. I also still had the dolly attached to it. Don't think its too bad. 532 lbs ready to drop in. Of course no headers or accessories.

440 10:1 eddy 84cc heads lunati voo doo solid roller cam. I have been researching harmonic dampers for my set up. Need advice and recomendations. Thanks in advance.Forged crank.

Need some advice. I am putting together a 440 with eddy 84cc heads, Lunati solid roller cam 237-243 @ .050 .566 & .573 lift. The question I have is on roller or non roller tip rockers. With a non roller tip will there be an issue with the side loading on the valve stem. I understand the correct...

Wanted to see what timing chain covers everyone with roller cams are running. Stock reinforced or???? for roller button. Pics appreciated. Thanks.

Anyone running the scorpion brand mechanical roller lifters? Thinking about una**ing the wallet for these to use in my bb that I am building for my Demon. Says they have pressure oil feed to the roller. Car will be primarily street. Feedback good and bad would be appreciated. They are the...

Ok all I haven't posted any updates on my Demon for a while, been too cold to do much. Here is what I am thinking of putting together for the engine combo and I wanted to get some input from members. The car is primarily being put together for street duty, with a trip to the strip once in a...

Ok, I am starting to collect parts for the install of the 440 into the Demon. I am trying to figure out the type of valve covers that will clear the blower motor and heater connections, planning to use adjustable valve train. Also what intakes (outside of factory) and air filters will clear...

Hello all. As I am new to the A Body I am looking for input as to what others are using as far as radiators (22" 26" aluminum brass rows fans) and oil pans ( 187 402 aftermarket) and what types of clearance on oil pans to k frame, pavement, steering linkage, headers. I am trying to find...