Search results for query: *

I’ve got a brand new msd digital 6AL cd ignition box for sale, brand new, never been installed. Still in the original box with original instructions and brand new wiring harness. Asking 200.00 shipped from Montana.

I’ve got a quickfuel q-series ban-750 blow thru carburetor for sale. Low miles, never been apart before, tune of the carburetor is factory. This is a 900 dollar carburetor with under 2500 miles of run time on it. Asking 675.00 shipped. If interested send me a message.

i have a 741 case for sale that has open 3.55's in it. Gears are tight and quiet, has a brand new pinion seal. Asking 175 plus the shipping.

ive got a 741 8 3/4 case with open 3.55s for sale, nothing wrong with it in fact I ran it on my truck for over a year and the gears are tight and quiet and it has a new pinion seal. Only reason I'm selling it is cause I upgraded to a 742 case with 4.56 gears and a sure grip. Asking 200.00...

ive got A mopar performance distributor for sale that I purchased from don at fbo systems last year. It has an adjustable mechanical advance and adjustable vaccum advance. Mechanical advance is set at 18 degrees currently and timing is all in by 2800 rpm. The vaccum advance adds an additional 14...

ive got a Mopar performance tach adapter for sale, part number is P4876738. Works great, just don't need it anymore. Asking 50.00 dollars plus the shipping.

im selling a Detroit 7290 u-bolt style 10 spline pinion yoke. It's pretty much brand new with around 500 miles on it. It came on a 742 case I bought but I'm running a 1350 series shaft so of course I had to swap yokes. Now this 7290 yoke is on the shelf not being used. Asking 75.00 plus the...

I've got a 741 case with open 3.55s for sale, gears are tight and quiet. Ran them for a little over a year with now issues. It has a brand new pinion seal. I just upgraded to a 742 case with 4.56s and a sure grip. Asking 300.00 plus the shipping from Montana.

ive got a small block water pump pulley for sale, the number on the pulley is 36988. I've been told it's for a/c equipped small block mopars. Its straight, and in good shape. Asking 40 dollars plus the shipping. I think I can have it shipped in a 10 dollar usps priority mail box. If interested...

I've got a mopar performance tach adapter for sale. Not much use on it, worked great for me. Wiring is in great condition. Asking 50.00 dollars plus the shipping. If your interested send me a pm.

I've got a mopar performance tach adapter for sale, the part number is p4876738. It's in like new condition, only been ran for a few months and was installed inside the cab. All the wiring is in great condition. Asking 40 dollars plus the shipping. I'm located in Idaho, this item will easily...

I've got a 8 3/4 10 spline 7260 series pinion yoke for sale, it's in good condition, the ears are in good shape, no gouges or dings from the u-joint snap rings. I pulled it off my 8 3/4 and upgraded to 1350 series yoke. Asking 25.00 dollars plus the shipping, I'm located in Idaho and it will...

I've got a pinion snubber that came off of a chrysler 8 3/4 rear axle, I have sanded it and painted it flat black. Asking 30.00 dollars plus the ride, I'm located in idaho. Pm me if interested.

I have an older Holley Pro-jection tbi set up. It comes with the tbi set up and the analog brain box and the wiring harness for the brain box. I know this system works, my father had it hooked up to his crate 360 magnum and he also ran it on a 440 in the early 90's. It's a 670 cfm tbi. Asking...

I have a Mopar dual snorkel air cleaner that I pulled off of a 1968 Plymouth road runner with a 383. It is in great shape, it does need painted, someone tried to paint it but didn't do a very good job. I know these are hard to come by and I'm willing to part with this one for 300.00 or best...

I have a set of aluminum valve covers for 318, 340, or 360 small block mopar engines. I don't know what brand they are, but I believe they may be M/T's? I'll take 20.00 bucks plus the ride for them thru ups or usps or fed-ex. Pm if interested.

I have a used Mr gasket 1 inch 4 hole phenolic carburetor spacer for sale. I paid 35.00 bucks for it and used it for 6 to 9 months. Asking 15 bucks plus the ride thru usps which will be 4 or 5 dollars.

I have an older Mopar performance distributer that has the Mallory mechanical advance mechanism along with a mopar spring kit. The part number to the spring kit is 1-p5153446. The distributer came with the crate 360 magnum my father purchased in 2003 from mopar. The distributer comes with a...

I have a Dual plane Edelbrock Rpm Air-Gap intake manifold For Sale, This intake fits Magnum engines, I currently have it on my 360 magnum. There is nothing Wrong with this intake manifold, It was bought brand new in June of 2010. It has maybe 5000 miles on it. I paid 310.00 for this intake...

I've got an edelbrock streetmaster aluminum single plane intake manifold for sale. This intake will fit la 318's and la 360's. It is in pretty good shape, been ran for awhile on an old 318 of mine that finally died from high mileage. I'm asking 50.00 bucks plus shipping for the intake, I can...

Got a Quick Fuel super street series 680cfm vaccum secondary carburetor for sale, This carburetor has only been ran once for about 20 minutes. It has blue metering blocks and a blue base plate instead of red. This carburetor has changeable idle air bleeds and high speed bleeds, changeable idle...

Got a used Edelbrock streetmaster aluminum 4 barrel intake manifold. It is in good condition. It was ran on an old 318 of mine for a couple years. it is a single plane manifold. Asking 75.00 dollars plus shipping. I can use ups, usps, or fed-ex.

Got a used 1405 edelbrock performer carburetor, manual choke. carburetor is in great working condition, does not have many miles. Asking 125.00 plus shipping. I can use ups, usps, or fed-ex.

Got a brand new quick fuel super street series 680cfm vaccum secondary carburetor for sale. This carburetor has been ran once for about 20 minutes and that's it. Just long enough to set the floats and adjust the idle. It has a 4 corner idle, changeable idle air bleeds, changeable idle feed...

Got some aluminum M/T valve covers for sale, they fit 318, 340, and 360's. Asking 50.00 bucks for the valve covers plus the shipping. I use ups or usps whichever is cheaper.

Got a 4 barrel intake manifold for sale, It is an edelbrock streetmaster can be ran on a 318, 340, or 360. It's an aluminum single plane intake manifold. Asking 75.00 dollars for the intake plus shipping. I use ups or usps whichever is cheaper.

Got a used 1405 edelbrock carburetor. It's in good condition, It's about 2 years old, low miles. I ran it on the 360 that's in my old wood truck. Asking 125.00 for the carburetor plus the shipping. I use ups or usps, whichever is cheaper.

Got some M/T valve covers for sale, includes oil cap and breather. They fit 318's 340's and 360's. They are aluminum. Asking 50.00 bucks for the valve covers plus the shipping that it will cost using ups.

Got an edelbrock street master single plane 4 barrel intake manifold for sale. It is aluminum and fits 318's 340's and 360's. Asking 75.00 dollars for it plus the shipping that it will cost using ups.

I have two valve bodys for the 727 transmission, One of them has a B&M transpack shift kit installed in it, I dont know wich one tho. I'm asking 100.00 bucks for both valve bodies or 50.00 bucks each. If interested pm me.