Search results for query: *

  1. "Dart67"

    A Body Fuel Tank "Map"

    I made this "map" up sometime back and have been meaning to share it here. This "map" was made using an old fuel tank from a 1967 Dodge Dart. See attachment.. I cut a hole in the top and positioned the tank as if it was mounted in the car. I then added 1 Gallon of water at a time and measure...
  2. "Dart67"

    Close as you will come to getting an OEM fuel sender..

    This is about as close as you will come to getting an OEM fuel sender for your A body..... From personal experience it is close, but still needs a little calibration. Herb...
  3. "Dart67"

    G.a.S. Matcher

    See this post G.a.S. Matcher
  4. "Dart67"

    OEM Fuel Sender Repair 1967 Dart

    "Dart67" submitted a new Article: OEM Fuel Sender Repair 1967 Dart Read more about this article here...
  5. "Dart67"

    OEM Fuel Sender Repair How To PDF

    This is something that I have been going to put together for some time now. I have done this to two OEM senders now. I have one in "Ole Blue" and it works like new. This is far to long for a post so I created this PDF with photos. I hope this will help a few folks get their OEM senders...
  6. "Dart67"

    Solution to Fuel Gauge/Sender Problems

    I came across this tonight while looking for replacement Non Linear Fuel Sending Units for our MOPARs. http://technoversions.com/MeterMatchHome.html I am going to call them Monday and will more then likely order one. Sure looks like promising solution/fix for all of the mismatched Factory...
  7. "Dart67"

    Non Linear Linear Fuel Sending Unit Difference

    This is what the Factory NON-LINEAR Resistor Board from a 1967 Dodge Dart Fuel Tank Sending Unit looks like. It is of an uneven shape with varied spacing over its length. I believe that the shape of the board is so that due to the spare tire "cut out" in the A Body fuel tanks. I think...
  8. "Dart67"

    Fuel Tank Strap Single to Double Conversion

    Here is how I converted the fuel tank hanger on my 1967 Dart Gt Convertible from a single strap to double strap system. I am sorry that I do not have any dimensions to go by. I think by looking at the photos you can get close. The front hangers were cut from an old worn out concrete saw...
  9. "Dart67"

    Aluminum Fuel Tank Project / EFI Fuel Cooling

    Now that I have my cooling system problems fixed, another cooling issue has come up. This time with the fuel temperatures. After driving the car for 25 - 30 miles it will act like the fuel was shut off and die. It will restart and run for another 4 -5 miles after setting for a few minutes...
Back
Top