Search results for query: *

So I had my car in the shop today to get it tuned by people who do it for a living. When I took it in i told them right off it’s not a race car and I’m not hunting for max hp I just would like it to be dialed in and running great when I get it back. So it runs sweet and I don’t plan on taking it...

Do you think 10.5 power seem like to much. The carbs both came with 10.5 power valves in them. Vac at idle cut in half is supposed to give you power valve size right. But what about if your running 2 carbs is that cut in half again? I just fouled my first set of plugs. Power valves don't come in...

i have 2 750dp Holley part#80573s an they have the duel 50cc accelerator pumps. My question is are these pumps to big? The racier 750dp part#80576s has 30cc pumps and that’s got me to thinking. Should I be starting with smaller pumps. Ive been driving it around town an it’s crazy but may be a...

So I noticed with two carburetors side by side one of the chokes touches the throttle of the other carburetor when I put them on. They are 4150 style 750dp carbs with manual chokes. I’m trying to find some info on weather both chokes are removed or just one choke. And if one choke is left on is...

Called dyers blower service this morning, asked about the 6-71 kit price for a sb mopar polished set up. He said 4,100 bucks everything but the carbs, linkage, and fuel lines. I'm fixin to pull the trigger in January on one. Said they have no problems with dist clearance either on there kits. I...

So I bought this snow water/methenal kit awhile back, an am just getting around to messing with it. So what I thought a guy could do when I first bought this kit. Was a guy could go get some washer fluid with the lowest freezing point an get a decent amount of methanol in the jug. But after a...

Would anyone here know if the weiand 6 groove 2.66 pulleys sold through jegs and summit, work with b&m mini super chargers? I thought I read somewhere Holley owns weiand an bought the b&m brand as well? I pulled my upper pulley off to get measurements, jegs couldn't answer if there pulley they...

I'm not in the market at the moment, but does anyone know where I would be able to get different sized crank driven pulleys for a small roots style supercharger? I looked around on the web and have'nt come across any for moper small blocks. I talked to one of the guys from this site at a car...

So I've almost got it put back together, But I'm going to have to run a electric fan I think. I've been looking around the web for the proper belt tension, and thought I found it the other day but can't seem to find it again. I thought it was something like 1/2 inch of slack in the belt when...

So my supercharger finally came. I am wondering though, do these little bnm superchargers use a blow off valve of some sort? I don't see anything on the manifold. By the measurements I was given It's a 162 bnm. Thanks

So I've been looking on summits an jets sites at a retard set up for boost, but they all seem to say they need to be ran with msd ignition. Am I reading this wrong? I have the mp ignition an the orange box, will I have to switch ignitions to mad to get a retard system to work? I've also been...

Anyone want to share what fuel pump you are useing? I have a electric carter, but I don't think it will keep up, with a forced induction set up.

I just posted this in the fuel section and realized it may need to be in this section. Anyway, I am wondering about carb size, and type that mounts on top of one of those little superchargers like the weiand or BnM. I just got it off of ebay and have'nt ever had a supercharger before, but I've...

Going to be useing just my mp distributor at first, when I add a paxton to my car. Any idea of a good starting point on the initial timing for 8lbs of boost. I'm at 20ish right now. I was thinking maybe 16 to start, will this be enough? I will get one of those dial back boxes at some point, but...

I am wondering how well the xe284 cam will work with a Paxton charger. I am sure there are better cams that work with a Paxton charger, but this is the cam I have in it now and would sure hate to break in another cam.

Do I have to have a blow through carb to make this work. Or is the blow through carb for bigger horse power gains? I realize adding a supercharger a guy will be looking for big hp gains, but what if he doesn't have a blow through carb yet? I have a 680 quick fuel ss carb will this work till I...

Does B&M or Weiand make a small supercharger like a 142 144 177 for small block mopar? I would like to get this style of charger for my 318 engine. I installed the dish pistons on a 4 inch crank figuring I would some day put a charger on it, I installed rhs heads and a airgap intake and voodoo...