Search results for query: *

picked up a set of used 6077 heads replaced some valves, did a valve job, plus a little porting building a 1970 spec 340 engine cam is 268* at .484" .040 over pistons are .035" above deck using a 1008 fel pro gasket at .040" compressed heads are .060" recessed chambers was thinking of...

I purchased these heads, knowing the condition 10 minute, run time, engine started ticking, was shut down this is what was found. what caused this is it just a freak thing? I'm in the middle of porting the heads, replacing the valves Didn't see anything wrong with the others...

Starting to work on a 70 340 Dart---weekend "Street Warrior" 4-speed 3.55 SG stock tires/wheels manual brakes parts I got to work with 68-340 recent build, 0 miles .040 over (4.080) negative deck pistons (68 year) stock size rods and crank Edelbrock Performer RPM alum heads #...

will the pan clear the k frame while installing the eng, and 727 trans with the safety shield also bolted together as one unit into a 70 dart Maybe need to drop the steering center link ? Thanks we would rather find out now Then when the eng/trans is swinging from the eng puller :banghead:

Where to get a cable, for 71 dart- V-8-four barrel Looked at rock auto, did not find Thanks, howard

What spool mounts are these drivers side 3642811 3817169 pass side 3642810 we are wanting to put the 340 in a 70 Dart (73 spool mount K frame)with headers, auto trans and don't want to mess around trying to get the engine set in Thanks Howard and Gayle