Search results for query: *

My nss has been leaking for some time. I decided to tackle it today when I took it out I noticed there were two gaskets. Should there be two or did the tranny shop leave the old one? Any tips before I go to the store to get the things I need.

The large lever on the transmission that the stock shifter linkage slides into has a welded extension. The car does not manually shift right. I bought a used arm at the nats and will install tomorrow. Is there a proper way to adjust the linkage? I had my brother start in park and work the...

I have a 1995 Neon that the shifter cable broke. I took the battery out and replaced the shifter cable. It seems to shift through the gears perfect but I cannot get the key in the lock position in park. The key goes forward fine just won't lock. Is there any way to adjust the shifter cable...

I need the shifter linkage for a 727 that runs from the bottom of the shaft to the front of the transmission. It is approx. 10" long. If anyone has one please pm me.

I am replacing the tailshaft(column shift) on my 727 so that I can mount the shifter linkage for a floor shifter. I am having trouble spreading the clip to remove the tailshaft. The opening for the clip is on the side of the tailshaft, the bolts are removed so I can spin the tailshaft but not...

I am running out of things that I need or have overlooked!!! Body paint done. Motor done. Exhaust done. Interior done. Electrical 3/4's done. Tranmission thought was done. 727 tailshaft that has two holes to bolt the floor shift linkage to which will make my car move after 17 years...

I am trying to hook up my floor shift (727) to my 340 in my '67 Barracuda. The torque shaft assembly(727) mounts to the bracket on the tranny. I don't have any holes to mount the bracket into the tranny. Does this mean I can only run a cable system? Is there a factory linkage to run a 727 to...

Can anyone take some pics of their shifter brackets on an abody floor with a tape measure. I need some more references before I weld the brackets in. The more pics the better off I'll be.

It's time to install my shifter on my new floor, but I cannot find the drawings and measurements I did before taking the floor out. I don't know exactly where the bracket mounts. My car is a 1967 barracuda with stock automatic shiter on the floor. any help would be greatly appreciated.