Search results for query: *

Working on my 66 Dart. I started to clean the panels using 409 cleaner but they didnt come what I would call clean enough. So im thinking at this point I will paint them with the vinyl interior paint like I used on my dash pad. I was wondering if anyone else has done this? Im sure I cat find a...

Working on my 66 Dart, other than the red trim at bottom of the windshield are there any other trim that is supposed to go around the windshield? I dont remember if I took anything else off. I dont think there is. I know the rear window gets a metal trim arounad it. Pics would be nice!! Also...

Started to prepare to install the headliner. Its a 2 dr hardtop. I installed insulation on the inside and I put the bows thru the pockets on the headliner. SO heres the question I have. The pockets or sleeves that the bows slide into, first there are 6 and I only removing 5 bows. 2nd, since...

I'm going to start installing my interior in my 66 Dart. Here are some things that will make this a little more difficult. First I have installed a rollbar. I have the front bars welded to the floor in the front floor pan area. Of course they tilt toward the rear so I will need to cut holes into...

Im getting ready to put in a new headliner in my 66 dart. At the top of back rear window there are 2 springs. If i remember they attached to one of the headliner bows(rear one). Does anyone have a pic of this and also where does the back bow mount into. I have 5 bows from the front windshield...

I remember reading a post a few months back about changing the dash mounting screws on a 66 dart that would allow you to take the dash out without removing the windshield. Im ready to put mine back in and want to change it for future removal. Does anyone remember what change was done? Thanks Rod

Ive been looking for a complete set of arm rest pads for my 66 Dart. I havent found a vendor yet that carries them. The base is 10" wide and the actual arm pad is about 8 3/4" long. Has any one had any luck finding a vendor that sells these. Only thing I found is a 10" or 11" arm pad. Thanks Rodney

I am ready to remove the dash on the Dart. I did a search and everything I find says that the windshield needs removed, however I think those post are for newer darts. I looked under the dash and I see what appears to be sheet metal screws at the top near the windshield. Inside at the bottom of...

I want to change the dash appearance on my 66 Dart. I was wondering how many have made custom dashes for your A-Bodies and could you post pics of what you have done. Im not sure what direction I will be going yet. Thanks Rodney

I recently acquired a steering column from what I was told is out of a 65 Barracuda? I am hoping that the steering wheel from my 66 Dart will have the same horn ring so I can use that and then just find a center cap for the cuda wheel. I am having trouble removing the horn ring from the 66...