Search results for query: *

I'm looking for some pictures of the front view of a big block I also run a mini alt. mounted low on the pass side any pictures will help

Has anyone ran he Jegs windage tray with the built on gasket part #555-502001. I put one in and all the gasket is pealing off leaking. just wondering ?

I'm currently running a 12v no alternator. looking to replace the battery I would also like to put on an alternator. but I have been reading that some are going to a 16v without an alternator (no belt to worry about) also looking for pictures of alternator mounting with elephant ears. looks like...

Not sure if this is the right forum or if BB would be better. The question is how much oil do you run in your big blocks with a 7qt milodon pan. I seem to have a lot of crank case pressure. 500ci on a 400 block. and yes I do have a evac kit on it. I've been fighting oil leaks on the motor. fix...

So here is the question. I just built a 499 and ave about 25 passes on the motor and the pan gasket started to leak. i have the breathers hooked up to the exhaust. Just wondering if anybody has had a problum with the baffels in the valve covers being to close and not letting the evap system...

Took a chunk out of the block today down by the oil pan. So now the question is get a new block or has anybody ever weld one up and hard block it. Its still in the car so i'm not sure how bad yet it look like about the size of half a top of soup can.

Made it to the track. The car worked good. just a couple heardles first battery died, the the electric water pump quit. best run was 6.94/102 in 1/8 now time to start tuning.

so this is going to be my first year drag racing and was wondering what you all use for a battery charger? I have no alt. I will have to charge between rounds(if i make it that far) would like a more compact one as not much room. thanks for your help!!

OK so every thing looks right but no spark at the plugs. well it will spark once but then its done i tryed timming the box msd 6al-2 the coil will only fire (test light on the + will light when i first start to turn over but then no more i tryed a different dist, to no luck.

What do you all run for motor oil brand and weight just getting ready to fire for the first time in the car. I'm running 474" 13/1 on e85. Thanks

32/14.5 x15 what brand is everybody running and pros and cons i want to run MT but looking for input Thanks

looking for info. what box do you like or dilike 6al or 7al looking to buy one just knot sure on what to go with. it drag only 474in BB auto thanks

What all has to be replaced to run e-85 ii need to buy a new carb anyways I thought about quick fuels 1050 e85 I have 1/2" aluminum line but it's not coated and what about the el pump I have a holly blue thanks for any help.

i'm looking at a 2x3 chassis car. the pictures of it look like they cut the floor and fire wall out and set the car on top. and welded it to the rocker pannels. It has alum. floor and firewall now with a steel (scatter shield) bolted to the frame over the torq converter. I do know i will have to...