Search results for query: *

Well, after a compression test, 11 years and about 50,000 HARD miles, I am taking out my 360 and building a 408 stroker. I was looking at this kit and if anyone has any experience, I had a few questions. https://m.summitracing.com/parts/sca-1-98113bi To anyone that has experience building a...

What's up FABO, I would like to know what valve covers everyone is using on their 318/340/360? I have a 360 with x heads, stock rockers and MP black wrinkle valve covers with baffles on both ends. I have a breather on one side and a pcv valve on the other side and I am sucking out oil. I am...

Wondering if anyone is using the hydraulic lunati 60403 cam as well as factory air conditioning or aftermarket air conditioning with it? I am planning on switching from my XE284 to this cam in my 360 to help with overall drivability, and have a better idle and vacuum for the air conditioning and...

Hey everybody, I am wanting to go a step down from my current cam which is the Comp XE284H. 284/296 .507/.511. I like the cam but it's just a little too radical for the stop and freeway driving I usually do. I was thinking about switching to a hydraulic roller such as this one by lunati...

Hey everyone, I have a 10:1 compression 360 with an airgap manifold, tti headers, ported x heads, comp xe284 cam and a speed demon 750cfm carb that's having some sputtering issues between 1500-2000rpm when in drive at about 25mph. If its left in drive and I floor it at that rpm range it...

i thought my problem was fixed but now it is doing the same thing all over again. the car when i first start driving it is ok i can leave it in drive and it is fine it wont idle low or stall. but after i get off the freeway no matter how many times i park it and let it cool down it just will not...

i just got a 383 and tore it apart and i think it might be bored out but i dont know for sure and i pulled the pistons and i dont see anything that says 0.10 ,0.20, 0.30 or anything all i see is an E, D, F and a 2 on a couple. i pulled the main bearings and they are blank too all i see is a...

hey ppl, i have a holley street avenger 670 on my 360 and it doesnt do it too often when im going around town but mainly coming off the freeway from turning 2500rpm to a red light (oil pressure is at 30lbs, temp is at 185 nothing out of the ordinary) if i start to give it gas after i just came...