Search results for query: *

Hey guys need some help here; first the back story: My 727 was working perfect then I decided to add a Turbo Action 3000 stall converter and put my 3.91's back in. Did that and road tested great, then I ended up blowing the rear servo backing out of the garage, frustrated and thinking it was my...

Hey has anyone heard of APC Valve bodies? I have a chance to buy one and I don't know anything about it. The number is 17156 950994 and is marked on there with what looks like an engraving tool. Thanks Jamie

Is it OK to run with one ring gear bolt missing? I am swapping out a set of 3.91's for 3.23 and I noticed that there was a broken bolt in the 3.23 ring gear I tried to get it out with no success. Just wondering if it would be OK to run with one missing??

Hi just a couple of questions I need help on: 1. If I run a deep pan (B&M) can I run stock dip stick? 2. Trans in neutral on blocks the wheels start to spin while idling; normal? Thanks Jamie

I have scored a really nice working 360 727 combo for my Duster and getting ready to install and I notice that there is no provision for my console shift rod bracket on the tailshaft. I have another tailshaft housing with the provisions are there any tricks to swapping these besides the...

Does anyone have the dimesions for the 2 support brackets that weld to the floor for 70-76 abody? Also where does the bottom bracket (for the shaft that ties the shifter to the gear selector lever) bolt to looks like it should be the trans but it has two studs and I don't know where it should...

Hi Guys; Just wondering if anyone can help me? I am debating on buying a set of what the guy calls nos gears (3.55's) . He does not know what case they are for and does not have the original box. The only thing he has is the numbers on the ring gear which he says 2070898 (maybe 489 and he...

I just bought a B&M Flexplate 360 (balanced) P/N 10236. My question is it is listed as a 727 but it has 2 bolt patterns can this be used for a 904 as well? Thanks in Advance Jamie

Hi I'm using a Dana Powerlok and always heard that I needed to use friction modifier. Is this true or with the use of new synthetic gear oil etc. is this still necessary? Thanks Jamie