Search results for query: *

I tried to sell this as a package but now am listing individual parts. I WILL make deals on multiple parts. This is a complete three speed manual package out of my 1970 Duster. It was in a running/driving vehicle until it was pulled on 1/5/24. I drove the car for nine months last year with no...

This is an 8 3/4" cone type Sure Grip unit with Richmond 4.30 gears. It came in a 489 case that I bought, but I changed it out for a more streetable gear and an Eaton Truetrac carrier. I was told that the previous owner used this as his "track gear" and that it was in good working condition...

I've got the valve springs off of a set of Edelbrock #60779 heads. We went with a big hydraulic roller and needed new springs so these were pulled with ZERO run time. The springs are #5767, retainers are #9736, locks are #9616. I will also include 16 new seals and 16 .060" spring shims. These...

These are a complete set of 273 adjustable rocker arms. The shafts are banana grooved and the push rods are straight. Includes hold downs and spacers. Price is $300 shipped to the lower 48 states. PM me if you have any questions?

This is a 66-67 273 factory four barrel intake. Date code is 12-5 which I believe makes it correct for a 66? It is in good shape and has been painted some time in the past. It has some pitting on the water neck area (see last pic) but that's an easy fix. Look at the pictures closely and PM me if...

This is a 1972 340 trap door air cleaner. A previous owner stripped off the orange paint and re-painted it black. Whoever did it, did a decent job. Not rattle canned. I suspect they did it when the car was painted. They also removed the trap door for some reason. Works as is. 340 Four Barrel is...

I never got a chance to install this on my Dart. I only opened the box to see what is in there and to read the instructions. It's never been installed. Shelf wear on box from sitting around. Summit wants $285 for it shipped. I'll do $225 shipped anywhere in the US. Send me a PM if interested...

I've got a set of four speed pedals for an A body. I was going to use these on a project but never got around to it. What you see is what you get. Asking $300 obo. Located in Kansas City. Also looking for a 70-71 340 air cleaner Thanks for looking!

I called this guy and it's an A body 8 3/4 with small pattern axles. No third member and the spring perches have been cut off. For $250 I almost bought it myself to save for a future project. Mopar 8 3/4

I got these two carbs in a parts deal and have no use for them. They are NOS Carter 9605S manual choke square bore carbs that have been sitting on a shelf for a few years. They are brand new and have never had fuel run through them. They are a little dusty from sitting and the finish is a little...

This is a BRAND NEW Carter 9636 625 cfm carb. It's been sitting on a shelf for years but it appears that it was never bolted to a manifold. It is a direct replacement for the 340 and 383 engines. It has the Mopar linkage and an electric choke. I got this in a parts deal and don't know...

My buddy won this at a local car show and has no use for it. It's a half off certificate for Flowmaster, Hurst or B&M products. The only restrictions seem to be no Hurst wheels, or B&M transmissions (big ticket items), and the total retail price can't exceed $2000. It expires in April so you...

I have an original choke coil off of 1970 Challenger 340 four barrel but is correct for A bodies also. It has the numbers 75 and BA148 stamped into it unlike the reproductions that go for $60. The rod has been bent and straightened. I'm asking $75 obo for this piece. I'd be...

This is a throttle cable bracket off a 1970 340 four barrel. Has been blasted and painted satin black. This is the bracket you need to add a four barrel to your 318 or 360. Asking $100 OBO shipped in the continental US. Paypal is fine with me.

I am selling this because I have no use for it and hope that someone else needs it to complete their project. The top is in pretty good shape but has been repainted. There is a small BB sized ding that will be covered when you add YOUR pie pan. The base has a couple of very small spots of...

I am selling a set of MSD 8.5mm Super Conductor wires and a Blaster 2 coil. A buddy of mine wanted to change the look of his engine so he removed these plug wires and coil and replaced them with the same pieces, only in black. There is absolutely nothing wrong with them and they were on a his...

I am selling the manual steering gear box out of my Dart. There is absolutely nothing wrong with it. It has served me faithfully for the last seven years. The only reason that I'm selling it is I have a line on a rebuilt box with some upgraded internals. A couple of years ago, I took...

I bought these for my 340 thinking that I was gonna change my plugs, but yanked the motor instead! They've been sitting on the shelf since last summer. I paid almost $40 plus tax for them at O'reilly, I'll take $30 shipped for them. They fit most Mopar V-8 engines with electronic...

I've got the old slant 6 K member out of my Dart after I switching it out to the V8 K member. I don't want to scrap it if someone can use it. Direct Connection used to have plans that you could use to convert these to big block K members rather than cutting up a good usable V8 one. It's good...

I am selling a 67 Dart, Valiant or Barracuda idler arm. I changed to a later K member and no longer need this. I paid $150 for this from Year One a couple of years ago, and it has less than a 1000 miles on it. I'll take $75 shipped, anywhere in the US. PM me if interested. Thanks for looking!

I am selling these for a buddy of mine. They are Motive Gear ring and pinion gears to fit a 489 case. These have no pitting or abnormal wear pattern. They were making no noise when he took them out. He's asking $120 shipped anywhere in the continental US. Send a PM if...

I have ALMOST everything you would need to put a four speed into your Duster, Dart, Demon, Barracuda or Valiant. I have been accumulating these parts for a couple of years and planned on putting them in my Dart, but now I realize that's probably not going to happen. The four speed is an...

I am selling a pair of mounts to put a 340 or 360 into a 67-72 A body that has the slant 6 K member in it. They worked fine in my car, but I bought a V8 K member to use with my 408. Asking $100 for the pair plus shipping. Thanks!

I am selling a complete Edelbrock intake set up for a small block Mopar. I am building a stroker motor and am selling these parts to buy a more appropriate set up for my new engine. The intake is a Performer 318-360 #2176 dual plane with square and spread bore mounting for the carb. It is...

I am selling a pile of 360 parts that I have accumulated over the last few years. All parts are in good usable shape. Just been sitting in the barn gathering dust. I will list what I have for sale, but want to sell everything together. You could ALMOST put a whole engine together with this pile...

Hey everybody! I'm cleaning out my garage because it's a mess and also to help fund the stroker build for my Dart. One of the things that I'm selling is a radiator out of a 70 B or E body. The number on top is 2998 956 which indicates it was used for 383, 440 & 426 Hemi cars. It was part of...

I have a nice uncut Edelbrock LD4B intake listed on Ebay. Link to Ebay auction It's a no reserve auction with the bidding starting at one cent. Good luck!

Everyone is always looking for the elusive 360 roller LA block so here it is. Craigslist link I confirmed with the guy that it is out of a 1990 truck and when I asked for a better picture of the lifter galley, he sent this... Should be a good starting place for someone in the...

Not mine, and I already have two 360's so I don't need another, but thought someone might be in need of one. Std bore. http://kansascity.craigslist.org/pts/3340318466.html

I have a used Mopar Performance small block M1 aluminum dual plane intake for sale. It came on a 360/300 hp crate motor from the early 90's that I bought. It came off of a "good running little hot rod" according to the previous owner. I am using the Edelbrock RPM air gap that's on my 340 now...