Search results for query: *

I currently have small bolt pattern. I am looking for a pair of hubs that have the 5x4.5 pattern. I want to build a set of big brakes using modern Mustang brake rotors and calipers, and building brackets. I can track down the bearings and rear seal, and then make the brackets to allow the...

The Colt is going 70's vintage Pro Street / Pro Stock. I am looking for some big block valve covers. Gold / red / blue anodized? "Direct Connection"? I have a set of black wrinkle M/T already, but thinking more of the anodized vintage look. This will be coupled with a single tunnel...

I want to transition from my 5.9 equipped 97 Ram, back into the Dart for daily driving. Truck is only getting 15 MPG, and the Dart got 3 mpg+ better when running, in poor tune condition. What I need to get the Dart roadworthy: Either a kick a$$ 1 bbl carb, or a complete 2bbl setup, intake...

I have a friend with an STR14 lower that is looking for a top. He would be interested in any configuration, but would prefer staggered dual 4 barrel configuration the most. Anyone? Beuhler?

97 Ram 1/2 2wd 5 speed. Engine gave up after 208K. I bought another engine locally, after pressure washing, it turns out to be 5.9 / 360 engine. 360 is externally balanced, so now I need a 360 weighted flywheel, which was not available (5.9 - 5 speed in 1/2 ton), so I have to find a...

I finally got the carb fixed, and the Dart is running. Problem is, we have 8 inches of snow that is melting, and the roads are wet. I need a washer bottle so I can drive the car! Anyone?

WHO: My contact info: [email protected] Zach Myers 913-708-4811 Cell WHAT: I need a 1 bbl for my /6 Dart. WHEN: Sooner then later WHERE: Kansas City WHY: I have rebuilt the carb I have, but it never had an acc pump rod. I fashioned a rod, and it worked, I had acc pump charge...

I am going to throw this out there, to see if any one might be interested. I am offering: A body 8 3/4 rear differential. Housing was recently scrubbed and painted, results can be seen here -->http://www.forabodiesonly.com/mopar/showthread.php?t=30195 I have backing plates, axles and...