Search results for query: *

Below are photos of my Moog offset upper a arm bushings. The instructions say to use the enclosed washers with the install but I see two things. 1. The flanges on the washers are not slip fit so I assume they press in as shown. 2. Now the eccentric adjustment bolt and the front suspension will...

Well today I dug out all my archived material to put my front suspension together and found a NAPA master cylinder I forgot I even had. This is after painting the wrong one and buying a new 67 disc/drum (NAPA) and detailing and painting that one. (seems kind of puny but correct for the car I...

OK, I installed the brakes on my 76 8 1/4 yesterday and did the drivers side first. Came out perfect and seems to be just like the book. Did the passenger side and the auto adjuster seems to centerline too high to engage the adjusting star. Messed with it for a couple hours and gave up. Double...

Getting my 74 A-body 8 1/4 ready to go into the car and i pulled the rear distribution block that attaches to the axle tube. I took the hard lines off the thing no problem but when I tried to remove the soft line (hose) it would not break loose from the block. Anyone know if it is integral with...

I am putting my 4 piston KH calipers together and have to replace all the hard lines. I have the ones I took off but cannot figure how to bend new ones & plumb them. For each side there is a plain tube and a wrapped tube. Any help much appreciated. I have the book but it is not real clear...

I am taking my Mustang rotors to the machine shop today for the required work for use on my KH disc conversion. I re-read my summary and the entire 40+ pages of Longgone's thread and the thought occured to me that they may be able to machine the inside bearing area for the mustang seal, solving...

I have attached my version if the summary of the LBP Mustang disc conversion for 4piston KH brakes. I did this after printing all 6 pages of the thread began by Longgone and needing to do this conversion myself, trying to educate myself. I hope the attachement works as I built it in exell.

I know this has been covered but what would be an option for a SBP disc brake conversion on my 67 notch. It is manual drum now and I have just been through them but I really want disc brakes for the front. TIA, Rat