Search results for query: *

Ok this started as a rabbit hole. I am planning a big block swap in my 67 dart. It currently has a stroked 340 with w5 heads and power steering. Now a big block stroker and headers creates an issue with power steering. I wanted to keep power steering and 2 inch headers for a potential 512...

I have a 67 dart weighs 3300 lbs Has 002 003 springs Rancho 9 way adjustable shock Springs moved to frame rail. 28 inch nitto drag radials Manual trans. 4.30 gear ratio When accelerating from a slow crawl the Car hooks very hard with little to no spin from the tires. The problem being is...

Ok I found my magazine from mopar action with the following information now in checklist form 73-76 stock a body pieces Tension strut rod bushings changed to urethane Moog k7103 problem solver upper control arm bushings Gusset upper control arm mount from bracket to rail Weld heavy washer to...

I am looking for the saginaw power steering brackets that are circled in red. for 1970-76 Mopar small block engines Unless someone can get the measurments of these brackets so i can make my own. I do not want to pay $75 for the package and only need 2 of them

I have a 1967 dodge dart that i plan to put in the spool mount k frame I am using the lower control arms with the wide sway bar mounting point. Power steering I changed the upper control arms to use the 73+ spindles and viper calipers. Now i want to replace all the rubbers, ball joints, tie...

I picked up a stock A body anti sway bar for my 67 dart at a swap meet. It did not come with anything other then the sway bar. It measures 44 inches center of hole to the center of the opposing hole. It does not look like it lines up to where it should. It seems too wide What is the...