Search results for query: *

This is a factory vehicle Certicard & holder. I'm told it's from a 67 Belvedere/Satellite. It's in fair to good condition. The holder has one stud missing. You can mount "as is" or use two sided emblem tape. Located in Savannah, GA I need to get $20 shipped (in the US) Thanks for looking!

I have a set of used door hinges from a 67 Coronet two door. Although the doors worked correctly when I parted it out, I am selling these as rebuildable cores for $15 plus the ride. Located In savannah, GA. Thanks for looking!

I have a nice used dealer certicard and two holders. one holder has all the white embossed print still on the envelope. It is missing one mount stud. The second holder has all of the mounting studs but the white print was removed when we cleaned it. The metal card looks pretty nice. See pics...

Cleaning out the garage getting ready for the FMA show in Ocala this weekend. Here's the first table full of $5 each stuff. Scroll to the bottom! I keep adding more! OK so far. we've got a body steering column holdup brackets, a length of defrost hose, rubber shift fork boot, two body tow hooks...

PRICE LOWERED TO $50! This is one of the nicer used mirrors than I've ever found. The chrome is in very good condition. I've tried to take pics both in the sunlight and under the porch. I cannot tell if this is a repro. It has a Mopar part number that says it's for a 69-71 Chrysler. It is...

I was about to take in my scrap aluminum to get some money up for the Carlisle space rent (due in a week) and I came across these headlight bezels. I was going to toss them on the pile but I noticed that they are in pretty good condition. Since the price of aluminum is about 35 cents a pound, I...

I'm cleaning out the garage & sheds to get up money for Carlisle spots (Due Oct 15th). This is a box of A and B body mirrors and parts that I've been carrying around. I count 11 interior mirrors and 6 left side remotes and one brand x. Some are rusty, a couple have the glass broken or missing...

This is a set of tail light sockets & lenses from a 74 Scamp. The lenses have some heat cracking but they should still work on a driver. There is some primer overspray (see pics) that I couldn't get off. The sockets have been loosened up and they move freely but they have nt been electrically...

It's not an A body but I picked up a new sealed package front license mounting kit recently. Mopar part #55156799AA is listed for the 05-10 Jeep Grand Cherokees, it could probably be adapted to other uses. Great if your state requires a front plate! Located in Savanah GA, $20 plus the ride which...

This is the driver's side fresh air vent from a 67 Dodge Dart. It has the little door that opens to let in air. As you know, the hinges tend to rust and lock up the door. This one was repaired. The hinge rivets were drilled off, the door hinge was wire wheeled, painted and lubed and the door was...

All of my Ebay parts are now marked best offer. If you don't like buying on Ebay, I will sell you the part OFF Ebay. here is a list of what is for sale...

Here's a set of windshield trim retainers for the lower windshield molding on a 66-70 B body (came off of a 66 Satellite) Mopar 66-70 Plymouth Dodge B Body Lower Windshield Trim Molding Retainers | eBay Thanks for looking!

I have a pretty workable 75 Valiant rear tail panel on Ebay for $50 plus the ride.. Can also sell off ebay if you prefer. Mopar 75 Plymouth Valiant Chrome Tail Panel Trim | eBay Thanks for looking!

I have a fiberglass right front fender extension from a 70-71 Dart or Demon. I've seen these go for $125-$200 per side but I have some bills to pay so mine's listed on Ebay for $99.99 plus the ride. Or you can pick it up in Savannah, GA Mopar 1970-1971 Dodge Dart Demon Right Front Fiberglass...

A while back there was a person looking for this trim in the "wanted" section. I didn't have it then. Now I have it listed on Ebay for $50 plus the ride from Savannah GA. here's a link: Mopar 70 71 72 Dodge Dart 3 piece Trunk tail panel Trim Molding | eBay

I have an original Go Wing Spoiler on Ebay. Opening bid $350. Buy it now $475. No reserve so highest bid takes it. Auction ends in 3 days. Thanks for looking! Here's a link: http://www.ebay.com/itm/231470935456?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

I have two sets of 72 Valiant tail lights. I think they also fit 71. One has a small chip in the lense. (see pics) I'd like to get $60 shipped for all 4 and get them out of the garage. Thanks for looking!

I have an entire front frame section from a 72 and a 75 A body. I also have a complete rear rail section from a 72. These are parts I normally sell at Carlisle or the Nats for $400-$450, but since those shows are months away and I could use some extra cash (and space in the shop) I'm selling...

This is a 72 Valiant 4 door that my wife has been using as a daily driver for the last couple of years. It is a 6 cyl, AC, drum brakes all around. This weekend, I'm parting out any piece that you might need (except for what I'm keeping) and bringing it to Carlisle. PLEASE! PM me with your...

I have a shell from a 75 Dart Sport on Ebay starting at $550 or $750 BIN. It is a very workable piece so I thought I'd offer it whole before I cut it up for Carlisle. It is located in Savannah,GA but delivery to Carlisle may be possible. Here is a link to the auction and about 30 pictures...

I got a set of "SPORT" emblems in a box of parts with a 74 Dart that I bought last summer. They are the gold faced ones, not the black ones. They LOOK like "out of package" NOS because there are no marks on the mounting studs, but I'm not certain. I have the set on Ebay starting at $50 with a...

I have a large lot of used A body wiper arms on Ebay starting at $25. http://www.ebay.com/itm/231181806871?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 Thanks for looking!

I have a bunch of round side markers on Ebay starting at $24.99 Thanks for looking! http://www.ebay.com/itm/331150943434?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

I was cleaning out the garage and came upson some Dodge emblems. I have them on Ebay starting at $30. Thanks for looking! Greg Purcell http://www.ebay.com/itm/331151711252?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

I found three pretty good 75 Dart Grille Bezels in the shop. They are laying around in the way so I put them on Ebay starting at $25 http://www.ebay.com/itm/231165528582?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

Before I relist this one EBAY, I thought I'd see if anybody wants it here for $20 shipped from Savannah,GA. http://www.ebay.com/itm/231087625856?item=231087625856&viewitem=&sspagename=ADME:L:EOISSU:MOTORS:1123&vxp=mtr#ht_3191wt_1082

I have a used Cuda hood with inserts. I think its a 67 or a 68. It's sitting around in the way here in Savannah, GA. It has some surface rust but it's pretty workable. I'd like to get $60 for it. I cannot ship but I can deliver it to the Don Garlits meet in Ocala, Fl on Nov 1st. Please limit...

I have a pretty nice set of front and rear bumpers from a 75 Dart Sport with the steel backing and shock absorbers. They are much too heavy to ship, you can pick up in Savannah, GA or I'll deliver to the Mopar Nats. $150 each 0r $250 pair. Pics available on request.

67 Cuda Hood $100 delivered to Nats 67 Cuda hood with inserts. Surface rust underneath,no rust through. No visible damage. $100 delivered to the Mopar Nationals.

I came into a bunch of emblems and got them up on Ebay. Also some 67-69 Dart parts. Thanks for your interest! 67 Cuda fish emblems http://www.ebay.com/itm/231021742916?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649#ht_4419wt_1119 Dart Gts emblems...