Search results for query: *

Well I got the truck running and on the road today, noticed a whining noise at times - got it home and checked and the transmission tq converter is making a whining noise at rpms above 1100-1200. is some whine normal ? this is my first time using a high stall converter. fluid level is full and...

I finish the overhaul of the transmission to today :cheers: I brought it home and plugged the torque converter in all was perfect. I then decided to check the flexplate bolt up before mounting motor and trans (good thing) the TQ converter and flexplate did not line up one hole is about 1/2 a...

Ok I finished the transgo tf2 last night and started the trans overhaul today. Every was going along smoothly until I started to install new clutches and steels in the high gear drum. I pulled out 5 clutches/steels, I installed 5 new ones and had way to much clearance between snap ring and...

I'm installing a tf2 shift kit in to my 904 and am unclear on a few things 1. several times in instruction it tells you only to preform this step if using a high stall converter. What is their idea of a high stall converter? I will be using a 2400 stall is that considered high stall ? 2...

I am installing a mp 390hp crate motor into d-100 short bed. I want to rebuild the a998 trans that is in it - I need help on the build to make sure it will hold the power I have been told so many things my head is about to explode. The powerplant should put down 410-430 hp and 440-460 ft-lbs I'm...