Search results for query: *

So here's the deal, we got a free old ram 4x4, had a spare motor in the bed, it's an 87 318, my brother and I pull the valve cover to see if it had 302 heads and yea it does, he'd like to use them on his 318 build but isn't all that thrilled with the 1.78/1.50 valves so he'd like to know if...

So I've got some X heads on my 360 that I'd like to port this winter when I change cams. I know there's a lot of smart porting guys on here so what do I need to know? Lay out the basics and school me on it, what should I use for bits? Am I looking for perfectly smooth ports or can a little...

So I've been reading up on building a 451 stroker. I can get a forged 440 crank and 440 rods, pistons I can get off the shelf from KB and the guys at the local machine shop can cut the mains down. My question is do the 440 crank counterweights need to be cut down to rotate in the block without...

I'm changing heads and have a set of MP adjustable iron rockers and I'm asking for a how to on setting these rockers. I have also heard that sometimes you can set up adj rockers to increase valve lift, what's that all about?? Thanks much.

I've got a 340 that needs to go to .060 over and I am having trouble finding a set of pistons for it that will give me a 10.5-11:1 CR with about 70cc heads. It has a stock stroke and stock rods. I would greatly appreciate it if someone could post some part numbers to some pistons that would work...

I was wondering if someone could fill me in on some numbers on stock X heads. I need to know what size combustion chamber they have and would like to know some flow numbers on stock cast X heads, thanks much.

I'm looking into buying a set of Edelbrock aluminum heads for my LA and I'm wondering if the LA shaft mount rocker setup will work on them. I figure there's a lot of budget minded people on here and a lot of guys who run the edelbrocks so this should be a good place to ask. Also, what's anyone...