11" brake self adjuster spring

[MechNerd]

All-

I have all the 11" brake hardware that I need, except the self adjuster spring. I've bought 2 different kits (Cordoba, D100) and the spring that was in them is about 1-1/4" too short. Rather than roll the dice and be wrong again, I thought I'd ask you all if anyone knows the required spring? Pic below. Thanks!

 

[Desoto291hemi]

Spring,,,,,?
Cable maybe ?

Tommy

 

[MechNerd]

Spring,,,,,?
Cable maybe ?

Tommy

OK, cable. Same question...

 

[townsend]

The Chrysler part number is 3461664 which can be purchased from AMS Obsolete.
The Raybestos number is H-2114.
Just to be cautious, have seller measure their cable.

 

[MechNerd]

The Chrysler part number is 3461664 which can be purchased from AMS Obsolete.
The Raybestos number is H-2114.
Just to be cautious, have seller measure their cable.

Exactly what I needed. Thank you.

 

[toolmanmike]

All-

I have all the 11" brake hardware that I need, except the self adjuster spring. I've bought 2 different kits (Cordoba, D100) and the spring that was in them is about 1-1/4" too short. Rather than roll the dice and be wrong again, I thought I'd ask you all if anyone knows the required spring? Pic below. Thanks!

View attachment 1716385247

11" brakes? What's that on?

 

[MechNerd]

11" brakes? What's that on?

66 Cuda. Bought an 8-3/4 for it (minus backing plates), and a member here DONATED them.