Badart
Senior Member
I have to buy a new pinion yoke anyway and order a new drive shaft. Can I get a 1350 U-Joint on a 904 slip yoke? What U-joints are you running with your combos? Dart with 408, 904, 3000 stall and 3.89 gears. FABO Rocks!!!
1350 are about the best you can get.
Is it overkill for you, possibly.
If budget isn't a problem, then go for the 1350's. The 904/1350 yoke is pretty expensive last I looked. I couldn't find one for under about $175 IIRC. I've got a place you can get a driveshaft really reasonable.
1350 are about the best you can get.
Is it overkill for you, possibly.
If budget isn't a problem, then go for the 1350's. The 904/1350 yoke is pretty expensive last I looked. I couldn't find one for under about $175 IIRC. I've got a place you can get a driveshaft really reasonable.