No sorry I dont have one of those
Call Wildcat Auto wreckers Im sure the can help you .Well, thanks for looking!!
Call Wildcat Auto wreckers Im sure the can help you .
Thanks, a lot...
1-503-668-7786 WildcatThanks, a lot...
I've got a few (I believe 66 and 67 are the same), BUT your problem is likely to be the fuse holders, which will have to be transferred to the new box. I've been swapping parts around for my '67 Barracuda. Kind of a pain, but I don't have the budget for a new harness.
I have one from a 65 cuda if that works
The way I am looking at it I might be better off changing the fuse panel with the whole harness, other wise I will need enough wire off the panel to splice every wire on it. Thanks
..Above
Thanks a lot for looking, and I mean no offense here, but that one is in worse shape than mine. I might jus have to put a new after market panel in. The car is far from stock anyways. Thanks again.
Some of mine are pretty nice. The holders might be available new (I've been swapping around to get the best ones in mine). I've also got bins of old wire harnesses from parted out cars. I'm still contemplating replacing mine with something with either more fuses (I've got one from a '69 C-body) or later with the modern fuses. It's not going to happen before I get the car running, though.
I haven't found them, either, but I plan to go to our local terminal outlet to see if they have them. I have a few of the slide-on ones. I have also run a couple through evapo-rust with so-so results. I have also bead blasted some with better results..
Rhode island wiring has them you have to call them.