1966 Wiper Parts

[Gouldylocks]

Hi All,

I have recently purchased a 1966 Plymouth Barracuda and it is in need of a set of wiper arms and blades. FYI this is my first foray into the world of mopar.
I have been searching on the internet for a few days for replacement parts but have got stuck.

I have found numerous examples of replacement arms for B-body cars but have struggled for anything from 1966 for the A-body. from the little research I have done it seems that there are differences based on the angle of the arms and attachment point.

If anyone is able to give me any advice regarding this it will be most appreciated.

I will add that I am from the UK and anything I order will have to be shipped from the US, so I am trying to get it right the first time so I don't end up wasting my money.

Thanks!

 

[65 Dartman]

I’m not positive on the 66s but think they’re the sane as 65s, have the “airfoil design” used 13 inch refills and the arms came in bright chrome finish or I’ve seen some were satin finished. I can get some pics a bit later

FWIW we were in London (Heathrow) last month enroute to Scotland (Aberdeen) last month. Loch Ness was closed to boats due to the high winds!

 

[cudamark]

Yes, '65-6 A-bodies of all models use the same arms and 13" blades.

 

[65 Dartman]

Heee are 2 examples of the correct arms and correct airfoil blades that take 13inch refills. The difference is the one on the left is shiny stainless steel but with a satin airfoil; the other arm is satin finished but with a stainless

two correct A body arms; the one on the keft the arm is stainless but with an aftermarket refill arm; the one with no refill, the arm is correct satin

And finally a correct satin arm that someone has added a longer arm to it

A coorect arm that someone has added a longer wiper refill

Finally the 2 all stainless arms and refills for my Dsrt

 

[Gouldylocks]

Yes, '65-6 A-bodies of all models use the same arms and 13" blades.

I wondered if that was the case, thank you.

 

[Gouldylocks]

Heee are 2 examples of the correct arms and correct airfoil blades that take 13inch refills. The difference is the one on the left is shiny stainless steel but with a satin airfoil; the other arm is satin finished but with a stainless

View attachment 1716438101

View attachment 1716438102

two correct A body arms; the one on the keft the arm is stainless but with an aftermarket refill arm; the one with no refill, the arm is correct satin

View attachment 1716438103

View attachment 1716438104

And finally a correct satin arm that someone has added a longer arm to it


View attachment 1716438104

A coorect arm that someone has added a longer wiper refill

View attachment 1716438106

Finally the 2 all stainless arms and refills for my Dsrt

View attachment 1716438107

If you can use any if these ither than tge ksdt 2, let me know

I might have more as these were the first I found

Fantastic thank you for the help!

And yes I could do with some of those that would really help out. Is it the last two you are saying are unavailable?

 

[toolmanmike]

I wondered if that was the case, thank you.

Figure out what you need and start a Parts Wanted ad in the Marketplace forums. Dang, I didn't catch it quick enough. Members should know they shouldn't offer items for sale on information threads. We have very successful sale and wanted forums here.

 

[Gouldylocks]

Figure out what you need and start a Parts Wanted ad in the Marketplace forums. Dang, I didn't catch it quick enough. Members should know they shouldn't offer items for sale on information threads. We have very successful sale and wanted forums here.

Ok thank you, I will head over there!