1968 BARRACUDA

[jonesboys]

windshield reveal trim clips /purchased the clips from Laysons for the front and rear 68 barracuda fastback the clips for the front are all the same as well as the rear Detroit Metal Tech says there are 7 green clips at the bottom of the windshield that are different from the rest just want to be 100% sure before installing the glass thanks Kenny

 

[Ironracer]

Think those are the longer ones. I have read that you should have your trim handy and test fit. I read the clips are different, and can jack your trim up. That is why I haven't done my front glass ( and the damn seal that wants to leak on my newly repaired/ painted floors... grrr

 

[jonesboys]

ive done three darts 68-69-69 just dont remember the clip sequence fyi i use 3m windshield install its in a caulk tube napa 28.00 and seal the gasket inside and outside the glass edge and to the body inside and outside use sparling it makes a black mess if you dont but it wont leak

 

[4spdragtop]

updates? I'm converting our 67 barracuda over to 68/9 stainless as trim. Looking for clip type and locstion/sequence