[Found!] 1969 340 Water Pump Pulley With A/C

[CL3406]

Looking for a single groove water pump pulley part #2463332 for a 69 340 with A/C.

Thank you

 

[383Scampman]

DO you know what the offset is? my pulleys don't have part numbers on them

 

[Sedanman]

I have a crank pulley with the rubber damper molded in for a/c small blocks if you need one.

 

[CL3406]

DO you know what the offset is? my pulleys don't have part numbers on them

The info I have is that most likely it is 2 5/8 high and around 6 inch in diameter.

 

[CL3406]

I have a crank pulley with the rubber damper molded in for a/c small blocks if you need one.

View attachment 1715000936

View attachment 1715000937

Thanks but I found one of those.

 

[barracudakid]

got it

 

[CL3406]

got it

Hi Eddie, I will send you an email with a couple questions..Thanks

 

[CL3406]

Hi Eddie, I will send you an email with a couple questions..Thanks

Eddie did you get my email last night? Thanks

 

[383Scampman]

I have found 2 water pump pulleys in my parts totes . First one : is 6 3/8 " overall with a 2 5/8 " offset , 5 7/8" inside the groove and the groove is 1/4" deep . Second one : 6 7/8" overall with a 2 1/4 " offset , 6 3/8 " inside the groove , also with a 1/4 " deep groove . $25.00 either one shipping included , $40.00 for both shipping included . Let me know . thank you , Tom

 

[CL3406]

I have found 2 water pump pulleys in my parts totes . First one : is 6 3/8 " overall with a 2 5/8 " offset , 5 7/8" inside the groove and the groove is 1/4" deep . Second one : 6 7/8" overall with a 2 1/4 " offset , 6 3/8 " inside the groove , also with a 1/4 " deep groove . $25.00 either one shipping included , $40.00 for both shipping included . Let me know . thank you , Tom

Thanks Tom for looking but I think the pulley's you have are too large...