1969 crank and fan pulleys

-
ninesixxjr

ninesixxjr

1969 Dodge Dart Western Sport Special
Joined
Jun 7, 2021
Messages
37
Reaction score
20
Location
california
In the process of doing an engine swap and need some help finding the correct pulleys for the 1969 340 in my dart. The ones i have i believe are for a 70+ engine and i cant seem to find the correct ones. I need a dual groove crank pulley and single groove fan pulley to run my alt. and ps. I dont have A/c and i have the early cast water pump the exits on the driver side if that matters. Thanks in advance.
 
Screenshot_20221105-220018_Gallery.jpg
 
You should just need the water pump pulley. Mine measures about 2 3/16" front to back. Sorry, I don't have one.

20221106_145849.jpg
 
That crank pulley sure looks like it sticks out too far from the balancer.
 
ninesixxjr said:
Thank you, this is big help. let me see if i can find the correct ones online
Click to expand...
Now that you know what you need you can start a parts wanted thread here on the sight if you are looking for used ones.
 
Was going to pm you, but looks like we are locked out. I do not have power steering, so mine are different. Hope you like aluminum if it gets down to that.
Good luck, you'll get it.
 
CRUZE 418 said:
Was going to pm you, but looks like we are locked out. I do not have power steering, so mine are different. Hope you like aluminum if it gets down to that.
Good luck, you'll get it.
Click to expand...
Lol thanks! ill get this baby fired up sooner or later
 
You must log in or register to reply here.
-

Back
Top