1970 A Body

[hunky]

Hi all, Upper control arms 50.00. Lower control arms. 60.00. Torsion bars 25.00. Strut rods 15.00. Kframe 45.00. Spindles for 10 in. drum 100.00. 10 in frt drums SBP.15.00 each. L/F is L/H thread. Make offers. All items plus shipping. Send email in PM for pics. Zip code for shipping.

 

[6pakattack]

How about a Slant 6 Oil Pan ?? Zip 32904

 

[hunky]

How about a Slant 6 Oil Pan ?? Zip 32904

No oil pan. No Slant 6 parts. Thanks Hunky

 

[leroymoparrr]

I have a 1972 Dart Swinger 2-door.It has the slant six in it now,with the 9 inch drums in the front.I changed the rear end a few years back to a 8 3/4 with 10 inch drums.I,m going to drop in a 1965 383 engine with only 74,000 actual miles.I see you have 10 inch spindles for front.I was just wondering how much more to change to make them fit;since it,s all slant six set up. Thanks.I know i should install 10 inch in front,but i,m not really sure if i would have to.

 

[BlackBrick]

Here's a bump Hunky - Leroy, if you are going to drop a 383 in that thing, better build the brakes first. The 10 inch drum spindles have kits to convert them to disk. Most of these kits will not work with the 9" drum spindles. Since the 1972 has the small ball joints, these would just bolt right in. Get the kit to convert from 10" drum to disk and then go to town with that Big Block.

 

[hunky]

Bump

 

[leroymoparrr]

If you still have the 10 inch spindles and both drums let me know the complete cost to have them shipped to Port Huron,Mich.Thanks.

 

[hunky]

If you still have the 10 inch spindles and both drums let me know the complete cost to have them shipped to Port Huron,Mich.Thanks.

Spindles & drums. SOLD. Thanks FABO

 

[GMachineDartGT]

Interested in the strut rods to 11743. Are they straight?

Thank you.