[WANTED] 2 Fender Bolts for 1969 Dodge Dart GTS

[Lord Sparky]

Looking for 2 original fender bolts for 1969 Dodge Dart GTS as seen in attached photo. The bolt head is 1/2 inch, not sure about the thread size. Already have the threaded clips they screw into.

 

[doug 371]

did you have 2 with a little smaller washer? 2 spots on my valiant had a smaller washer

 

[Lord Sparky]

I actually just noticed these were missing. I assume they were the same size as the other ones in the photo that go along the sides.

 

[RAT ROD AL]

I have a bunch. They may have a different markings on the head. What is on yours?

 

[Lord Sparky]

I have a bunch. They may have a different markings on the head. What is on yours?

Looks like “CY” with three lines sticking up at 10, 12, and 2 o’clock.

 

[RAT ROD AL]

I'll see what I have. Tomorrow!

 

[Dana67Dart]

Just for refrence...

Confirmed 67 Dart.
Washer 0.857 dia x 0.105 thick
Bolt od 0.300
Tip of bolt to underside of washer 0.867
Head thickness 0.200
Depth of head inset 0.072
18 threads per inch

All washers are the same size

 

[Lord Sparky]

I'll see what I have. Tomorrow!

Thanks!

 

[Lord Sparky]

Just for refrence...

Confirmed 67 Dart.
Washer 0.857 dia x 0.105 thick
Bolt od 0.300
Tip of bolt to underside of washer 0.867
Head thickness 0.200
Depth of head inset 0.072
18 threads per inch

All washers are the same size


View attachment 1716030341

View attachment 1716030344

Thanks!

 

[RAT ROD AL]

Different markings but these are fender washers.

 

[Lord Sparky]

Different markings but these are fender washers.

View attachment 1716030472

Al, those are some lovely bolts, but maybe I'll hold off until I can find some similar ones. Classic Industries has the whole set with what looks like the same stamping on top but they want $80 for it. Thank you for looking. You are a great member!