green67cuda
Well-Known Member
OK....I have issues with my engine placement...i have NO idea if it's close to where it should be for conversion mounts and/or headers......also deals with my steering column....
FIRST: in the first picture, it shows the oil pump relationship to the K-member....is it right for the conversion mounts?
http://home.comcast.net/~rodneywendell/wsb/html/view.cgi-photo.html--SiteID-1920024.html
SECOND: Is the first location picture close enough for headers to fit properly? Also, as shown in the second picture, the steering column is a power steering, floor shift column to a manual box connected by a homemade coupler. Will headers (if they fit with the fore/aft position of the engine) go around this?
http://home.comcast.net/~rodneywendell/wsb/html/view.cgi-photo.html--SiteID-1920028.html
FIRST: in the first picture, it shows the oil pump relationship to the K-member....is it right for the conversion mounts?
http://home.comcast.net/~rodneywendell/wsb/html/view.cgi-photo.html--SiteID-1920024.html
SECOND: Is the first location picture close enough for headers to fit properly? Also, as shown in the second picture, the steering column is a power steering, floor shift column to a manual box connected by a homemade coupler. Will headers (if they fit with the fore/aft position of the engine) go around this?
http://home.comcast.net/~rodneywendell/wsb/html/view.cgi-photo.html--SiteID-1920028.html