rm21h8a
Member
I have played with this harness and tried everything I can think of. I have no low side drivers on the coils or the injectors. I also have no low side driver to actuate the starter relay. I have all asd outputs to injectors and coils. The engine is a 2012 but I am using a 2009 dr (truck) pcm and harness. I have hp tuners and have disabled skim I have no dtcs other than o2s because they are not currently in. I have grounded the brake switch to pcm input. I have grounded the trans range sensor input for park/neutral. when manually making the engine crank the asd kicks back on as its supposed to but still no low side drivers on anything. Anyone used a factory harness and pcm on an eagle motor?