[WANTED] 273 2BBL AIR CLEANER

-
Status
Not open for further replies.

RPNARDI

New Member
Joined
Jun 5, 2019
Messages
2
Reaction score
0
Location
Sterling Heights, Michigan
Rating - 0%
0   0   0
Contact seller
Looking for one of these air cleaners that came on 64-66 Barracuda with 273 2BBL only. It clamps on the top of the carb instead of using a stud in the carb. With or without the nipple on the side! Originally painted black from the factory. NO SNORKEL! Let me know if you have one!

IMG_0397.JPG


IMG_0398.JPG


IMG_0396.JPG
 
Wow that's weird. My 66 was a complete car and it was a 2 bbl car at first and the base was not like that. Mine had the stud that you pulled on to snap it into the two holes in the top of the carb and my base did not look like that. Here is a picture of the carb and the 2 bbl base.
Bob

002.JPG


001.JPG


002.JPG
 
I have a 65 2 barrel air cleaner came off my Dart originally with a stromberg carb. It clamps on the carb can get you a pic after work. Dustin
 

I have one you can have for the cost of shipping. PM sent.

The non clamp on are like on my 67 2bbl 273. Maybe end of year switch over?
 
Wow that's weird. My 66 was a complete car and it was a 2 bbl car at first and the base was not like that. Mine had the stud that you pulled on to snap it into the two holes in the top of the carb and my base did not look like that. Here is a picture of the carb and the 2 bbl base.
Bob

View attachment 1715345101

View attachment 1715345115

View attachment 1715345116
Yea, that's weird because one of our Plymouth Club members has a '66 and it has the one I need on it! Could be a late version on yours. Regards, Russ
 
Status
Not open for further replies.
-
Back
Top Bottom