302 Heads on a 318 which hd gskts set?

[dusty1]

I have a stock 318 1972 model and have a set of 302 heads for it. Which complete gasket set would you recommend. Felpro or ? and any specific gasket set #?

 

[rumblefish360]

While the Fel-Pro gaskets are very good materials, there head gasket surrplied in there kits are .039 thick and a bore of 4.1+ I think it is. Alittle thick and wide. But not a huge end all deal. These are the gaskets in the MP gasket kit now.

I have been reading some poeple have problems finding the MP OE head gasket. They are .028 compressed thickness. This is the one I would use with the combo.

IF you can find a head gasket closer to the diamentions of the 318's bore and as thinn as possible, that would be ideal.

 

[6T9 V-100]

Oddly enough, just posted a couple questions in regards to the '308' heads

 

[70aarcuda]

the MP .028 gasket appears to be in stock at summit...

 

[rumblefish360]

Oddly enough, just posted a couple questions in regards to the '308' heads

The OE poster has 302 heads, not 308 heads. :-D

 

[LXguy]

the MP .028 gasket appears to be in stock at summit...

Do you have a link? I can't find it.

Thanks

 

[crackedback]

P4120094

http://store.summitracing.com/partdetail.asp?part=DCC-4120094&autoview=sku

Says N/A for availablility

Check here:
http://www.campbellenterprises.com/aengineparts.htm

 

[6T9 V-100]

I know Rumble...same era of development though!