[Found!] 340 90 Deg oil filter Adapter

-
Status
Not open for further replies.
1030594-47708c8368efe8767cdfe8c2c43e878e.jpg


There are 3 different bolts used stay away from the one pictured with the adapter. As you can see the holes are in line and makes the bolt very weak and it stretcfhes causing it to leak and sometimes break off.

The other two pictured are better but the one with the staggard holes flows more oil. These are facts.

I have the oval and staggered bolts with adapters. I scrap the bolts with the 4 holes drilled in a row I get $47.90 shipped to your door. Note on the picture with adapter you can see the bolt is stretched, Crooked and ready to break.
1030595-0a60306881c0a2d2341e36cfef51e893.jpg


NOTE; These pictures are off of the net and these are not my parts. It is not to hard to find info on this subject. Steve

View attachment 1715302226

View attachment 1715302227
 
Last edited:
Also new aluminum adapters for the magnum motors will not seal on a LA block unless it is a resto or R-3 block. The standard oil filter plates are also different and do not interchange.
 
Status
Not open for further replies.
-

Back
Top