[SOLD] 340 pushrods, hydraulic lifters with adjustable rockers

[physixx]

I’m looking for a set of pushrods for an LA small block with hydraulic lifters and adjustable rockers. The ball/cup design. They need to be the 5/16” diameter pushrods and measure 7.342” overal length and of course not be bent. If anyone can help I would appreciate it.

Thanks in advance.

Ken
Edison, NJ

 

[jefflock]

I will have to measure mine to be sure of the length.

 

[tekslk]

I have a nice set of hyd pushrods and hyd rockers complete on shafts 50 plus shipping for everything. These are stock not adjustable.

 

[physixx]

I have a bunch of the stock pushrods and rockers but I'm looking for the pushrods that are used with adjustable rocker arms and hydraulic lifters. They would be shorter than the ones used with the solid lifter. The cup/ball design. Thanks anyway.

 

[bvt69dart]

PM sent.

 

[physixx]

Hi bvt69dart. I never got a PM.

 

[bvt69dart]

Trying again!

 

[trapster]

Is this what you are looking for ?
http://performanceparts.com/part/Proform/66417C
http://www.jegs.com/i/Proform/778/66417C/10002/-1

only asking because I am in the same boat ?
IE I just found out my stock pushrods are too long going from solid to hydrolic lift.

 

[jefflock]

Sorry Physixx. I don't have the correct ones either.