H Hemidale426 Active Member Joined Feb 14, 2008 Messages 39 Reaction score 2 Nov 13, 2011 #1 I am installing pistons on rods is there any one way the snap rings should face opening up or down or doesn't matter? Thanks Dale
I am installing pistons on rods is there any one way the snap rings should face opening up or down or doesn't matter? Thanks Dale
66fs FABO Gold Member FABO Gold Member Joined Sep 9, 2009 Messages 9,015 Reaction score 4,292 Location Greenwood, South Carolina Nov 13, 2011 #2 That does not matter, but you should install them with the sharp edges facing out, away from the pin face.
That does not matter, but you should install them with the sharp edges facing out, away from the pin face.
M moper Well-Known Member Joined Dec 27, 2004 Messages 15,900 Reaction score 2,492 Location eastern CT Nov 13, 2011 #3 It doesnt matter. Over time they will probably turn so the opening is up.
H Hemidale426 Active Member Joined Feb 14, 2008 Messages 39 Reaction score 2 Nov 16, 2011 #4 Thanks That what I thougth but just wasn't sure. Thanks again