Nov 13, 2011 #1 H Hemidale426 Active Member Joined Feb 14, 2008 Messages 39 Reaction score 2 I am installing pistons on rods is there any one way the snap rings should face opening up or down or doesn't matter? Thanks Dale
I am installing pistons on rods is there any one way the snap rings should face opening up or down or doesn't matter? Thanks Dale
Nov 13, 2011 #2 66fs FABO Gold Member FABO Gold Member Joined Sep 9, 2009 Messages 9,095 Reaction score 4,392 Location Greenwood, South Carolina That does not matter, but you should install them with the sharp edges facing out, away from the pin face.
That does not matter, but you should install them with the sharp edges facing out, away from the pin face.
Nov 13, 2011 #3 M moper Well-Known Member Joined Dec 27, 2004 Messages 15,900 Reaction score 2,496 Location eastern CT It doesnt matter. Over time they will probably turn so the opening is up.
Nov 16, 2011 #4 H Hemidale426 Active Member Joined Feb 14, 2008 Messages 39 Reaction score 2 Thanks That what I thougth but just wasn't sure. Thanks again