340 rods

[sorewrist1]

I'm looking for a set of 340 rods. I have a 360 and would like something a little beefier than stock 360 2barrel rods. thanks Jim

 

[70aarcuda]

you will find out that the 340 and 360 used the same rod...only difference was the 340 is bushed for floating rods and 360 is not for pressed pins

no such thing as a 2 barrel rod...2 barrel 4 barrel same rod in 360/340

 

[Mad Dart]

That being said. If you are going to have your stock rods worked on "resized and bushed for floating pin and ARP Hardware." You may as well spend the $$ and get a set of Scat I Beams that are 4340! $$ better spent than having 250.00 into your stockers.

http://www.ebay.com/itm/2-ICR6123-2...Parts_Accessories&hash=item2ec76291e4&vxp=mtr

 

[70aarcuda]

That being said. If you are going to have your stock rods worked on "resized and bushed for floating pin and ARP Hardware." You may as well spend the $$ and get a set of Scat I Beams that are 4340! $$ better spent than having 250.00 into your stockers.

http://www.ebay.com/itm/2-ICR6123-2...Parts_Accessories&hash=item2ec76291e4&vxp=mtr

yup............plus each rod is over 125 grams lighter.....

 

[Mad Dart]

yup............plus each rod is over 125 grams lighter.....

125 Grams.... Damn that is alot of chittt man!! Lol

 

[physixx]

You will also have to balance the rotating assembly for the lighter rods.

Ken

 

[goldduster318]

I have a set if you still want some 340 rods. Drop me a PM.