341" mini stroker

[Streetwize]

Finally got the 341" 318 mini stroker in my Daihatsu Rocky, I hate to copy a link to another site but IO always have trouble with my pics being too big to post on here :-(

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=5404435&an=0&page=1#Post5404435

It should make for a fun bracket car, thanks again Bobby for the great Balance work!

 

[1wild&crazyguy]

good stuff man right on!

That really piss'em off at the track, losing to a mopar powered daihatsu.

 

[fishy68]

Cool project. Best part is you didn't use a 350 Chebby like nearly everybody else out there. Let us know what it runs.

 

[BJR Racing]

Thanks Bobby, Hope you have a great time with it.

 

[mullinax95]

Just curious.

"3.91 x 3.55 = 341"

Did you use a 3.58 crank (standard 360 crank)? I have never seen a 3.55 stroke crank.

 

[BJR Racing]

They made them in the 70's and 80's for race only packages in the mopar performance tips. But have since been discontinued, like everything else.

 

[mullinax95]

They made them in the 70's and 80's for race only packages in the mopar performance tips. But have since been discontinued, like everything else.

Oh OK... I didn't know that.

 

[Streetwize]

Vid 3 of the motor build and fire-up:

http://www.youtube.com/user/wizerulz#p/a/u/0/BWfK6cs8isE


You can search for vids 1 & 2 that go into the beginning and build-up.

Thanks to Bobby Joseph for the expert balance work!

 

[Badart]

Wheel stander? Very cool. We need to see it in action.

 

[fishy68]

Cool. You realize now you'll probably be needing wheelie bars!!

 

[Streetwize]

Actually it's over at Lenny Melton's Hot Rod Shop in NC getting fitted for a 4.56:1 8 3/4 and a roll bar and we're going to come up with a way to limit the front end lift.

It's a hoot...it was about hiking the wheels just driving it up on the Trailer...it launches HARD without really even trying:snakeman: