360 .03 over with ported W2 heads
- Thread starter mopfried
- Start date
-
Ok? Cool..what do you expect as a reply? Are you just posting as a statement of what you have? if so congratulations hope it runs like a freight train.
Sounds interesting. Tell us more about your plans.
A56
Street Survivor
Sorry, posted on my phone and half of what i typed didnt show up!
Fresh 30 over 360 block with ported W2 heads. I have flat top pistons now and need more compression. They are .005 in the hole. The W2 heads are 73 CC. I want a hot street motor on pump gas. I dont have a cam or lifters. I do have all the stuff to run the W2 heads but pushrods. Strip dominator intake and TTI step W2 headers. 4 speed and 355 or 373 gears. From the other post i gather I either need different heads or differnt pistons. What piston would be recomended?
Fresh 30 over 360 block with ported W2 heads. I have flat top pistons now and need more compression. They are .005 in the hole. The W2 heads are 73 CC. I want a hot street motor on pump gas. I dont have a cam or lifters. I do have all the stuff to run the W2 heads but pushrods. Strip dominator intake and TTI step W2 headers. 4 speed and 355 or 373 gears. From the other post i gather I either need different heads or differnt pistons. What piston would be recomended?
Dartswinger70
Well-Known Member
I like 360... 
Choose a rear gear & tire size first for camshaft selection.
A small dome will do you well. Look around!
A small dome will do you well. Look around!
Heck yeah I love w2 builds give us the details
Quick math would show ~10.25 w/shim gaskets, ~10 w/Felpros
What type of cam are You planning on??? What rockers???
Put the nitrogen on it. lol
No plan on cam yet. I have Mopar roller rockers and the iron rockers. Also the offset shafts and blocks.
Although my econo W2 was a 408 engine it ran 9.82 on BP93 pump gas with a .520 lift Racer Brown solid lifter cam.
-
