383 INTAKE

-
66lowdeck

66lowdeck

66 4 Speed Barracuda
Joined
May 13, 2019
Messages
22
Reaction score
1
Location
Hayward, Ca
I ordered a 2886 Edelbrock intake for my 383 low deck back in July. Been on back order since then and still no date from Edelbrock as to when this part will even be made. Does anyone have any insight as to what the hold up is?
 
Chances are they are waiting for enough orders to made a run of them. That’s what the story was on the Offy slant 6 calve covers
 
The low deck performer RPM is out of stock too. That's a bummer to have been waiting since July.
 
 
Aluminum production is very low also or at least that's what "they're" saying.
 
Looks like these are in stock now:

CA593074-7070-43EF-B1EA-1BB4ACC61BE3.png


Made over 680hp from a 452 with the RB version ootb.
 
AndyF may have done that comparison on one of his 470 test sessions.
(Edit- didn’t see that particular test listed)

My expectations would be.........Fully ported it’s probably about a wash.
Ootb, the TF is probably better.

My only experience with them was on the 452 I referenced above.
Not that this really means anything....... but the ootb TF certainly has better “looking” runners than the ootb Victor.
 
Last edited:
They also are moving their casting operations from California to South Carolina, so you can just imagine how long such a move will tangle up the production and machining processes. So the hotter faster moving parts are going to take priority which is to be expected. So I'm not sure where the 383 stuff falls into the mix....
 
PRH said:
Looks like these are in stock now:

View attachment 1715827117

Made over 680hp from a 452 with the RB version ootb.
Click to expand...
I’m considering thi
pishta said:
just buy used. They dont wear out and they are always in stock....The Street Dominator always scored high in the B shootouts.
Holley Street Dominator for Mopar 383/400 Intake Manifold - auto...
mopar 383 edelbrock aluminum four barrel streetmaster intake...
Mopar Edelbrock DP4B 383 Intake Manifold - auto parts - by owner -...
Edelbrock Intake Dodge Mopar Big Block 383 street master - auto...
Mopar Weiand 7511 intake manifold - auto parts - by owner - vehicle...
MOPAR Parts - auto parts - by owner - vehicle automotive sale
383 - 400 MOPAR -EDELBROCK TORKER INTAKE MANIFOLD -- INTAKES - auto...
Mopar big block edelbrock intake - auto parts - by owner - vehicle...
Click to expand...
good info. Thanks Pishta
 
You must log in or register to reply here.
-

Back
Top