HOTMOPR Mr Horsepower Joined Feb 8, 2009 Messages 835 Reaction score 185 Location Oakville, wa Mar 11, 2009 #1 Can you put the cross bolted mains on a standard 440 block?
D dusterdon Well-Known Member Joined Feb 18, 2005 Messages 1,384 Reaction score 9 Location detroit area Mar 11, 2009 #2 If you had enough money, you could do anything, but a good girdle probably would be the best way to go.
If you had enough money, you could do anything, but a good girdle probably would be the best way to go.
HOTMOPR Mr Horsepower Joined Feb 8, 2009 Messages 835 Reaction score 185 Location Oakville, wa Mar 11, 2009 #3 Gonna do a girdle too.. Just wanting to secure the bottom end for lots'o boost..
MidTexCuda Ancient Member Joined May 23, 2004 Messages 680 Reaction score 41 Location Deep in the heart of Texas Mar 12, 2009 #4 Before I cross bolted the block I would be worrying about the skimpy area above the crank...
M moper Well-Known Member Joined Dec 27, 2004 Messages 15,900 Reaction score 2,497 Location eastern CT Mar 12, 2009 #5 You best fix for a 440 main issue is a 400 block. Especially with boost. Cap walk is a small issue compared with what happens when you stop that with cross bolts.
You best fix for a 440 main issue is a 400 block. Especially with boost. Cap walk is a small issue compared with what happens when you stop that with cross bolts.