5 point harness, what to buy?

[cudaspaz]

Anybody have a good recommendation on 5 point racing harnesses?

I'm about at the point where I need to be thinking about seat belts.

I currently have the stock seats in the barracuda and will be putting in leather racing seats in the future, but I need recommendations.

 

[kocuda]

Is your car going to be used mostly on the street. If so I would recomend 4 point harness. The lap belts mount to the stock belt locations and the shoulder belts wrap the roll bar. And they are much easier to latch. Mine are RCI belts.
I attached a picture of mine.

 

[cudaspaz]

Kocuda,

That is exactly what I'm looking for in belts and seats.

Those seats are flipping awesome, where can I get some?

Did you have to modify anything to bolt those seats in?

 

[daryl h]

Heard RCI went under?

 

[kocuda]

Cudaspaz,
I bought the pair of seats and both belts for under $450.00 from, believe or not JC Whitney. I did have the advantage of being near their distibution center and wheeled and dealed with them a bit on the seats. They list them of $299ea but I bought the (pair) for $271. The seats are very nice, the sliders left a little to be desired.
As far as mounting I took the stock seat mounts cut the sliders loose from the pedistals bolted plate steel to the top of them to get to the new sliders, they were narrower, and bolted them together. I then was able to just drop them into the stock location.
It was a little pain in the a&& but from the looks of what you've done to your car, should be a piece of cake for you.

 

[cudaspaz]

Cudaspaz,
I bought the pair of seats and both belts for under $450.00 from, believe or not JC Whitney. I did have the advantage of being near their distibution center and wheeled and dealed with them a bit on the seats. They list them of $299ea but I bought the (pair) for $271. The seats are very nice, the sliders left a little to be desired.
As far as mounting I took the stock seat mounts cut the sliders loose from the pedistals bolted plate steel to the top of them to get to the new sliders, they were narrower, and bolted them together. I then was able to just drop them into the stock location.
It was a little pain in the a&& but from the looks of what you've done to your car, should be a piece of cake for you.

Thanks, I will check into them.

 

[blue440duster]

http://schrothracing.com/

 

[cudaspaz]

These look nice too.

http://images.google.com/imgres?img...acing+seats&start=80&gbv=2&ndsp=20&hl=en&sa=N

 

[71dustar]

im thinking about getting the schroth Profi II ASM 4 point harness http://www.schrothracing.com/products/Competition/profi-asm/profi-II-asm or the sparco 4 point harness http://www.racinglab.com/sparco-harness-4-point-2-camlock.html

 

[mattsmopars]

Cudaspaz there is a guy that i selling some seats that look alot like the one in the above pictures on this sites parts for sale saction. http://www.forabodiesonly.com/mopar/showthread.php?t=42722 maybe that will work if not its in the items for sale section on here.They are black scorpion racing seats. Nice looking seats, but i really like the stock buckets you have, but that up to you .BTW your car is looking great!