6/26/69 complete 340 built

-
Status
Not open for further replies.

340plot

the bushy bush
Joined
Jan 24, 2010
Messages
5,019
Reaction score
38
Location
va
Rating - 95.8%
23   1   0
Contact seller
i have a nice .030 over 340. it has a huge cam, unknowned specs. 273 adjustable rockers. mp pistons. they were 12:1 comp, but milled down to 10 to 1 specs. have w.p, timing cover, new double roller timing chain,deep sump oil pand and pickup on new h.v oil pump.

also included is a set of j heads that have 2:05 1:60 valves. double springs.

i bought this engine in a car, and just found a stock 340 with 4 speed setup. he will not break up his stuff, so i have no use for this engine.
every bearing in this engine is like new. the engine sat 7 years in the car. all the rings wer perfect, as is the cylinder walls.the crank is perfect. did not even need a polish

this engine is ready for new bearings(just for security), gaskets, and valve seals.

also(for couple extra bucks) have a old school holley strip dominator and 750 holley carb that was on this engine.
also for extra have a fully rebuilt 727 with shift kit, and high stall coverter between 3500-4500 stall. i have to pick it up from the trans shop. i had them go over it for a clean bill of health.
1800 for all
1600.00 for engine and trans
1,300.00 for engine. will not sell other stuff until engine sells


also take partial trade for a body tti or dougs headers
 

Attachments

  • 578.jpg
    75 KB · Views: 505
  • 579.jpg
    64.5 KB · Views: 485
  • 580.jpg
    83.3 KB · Views: 485
  • 581.jpg
    76.7 KB · Views: 509
  • 582.jpg
    99.6 KB · Views: 501
  • 583.jpg
    80.2 KB · Views: 498
  • 584.jpg
    57.2 KB · Views: 506
  • 585.jpg
    45.8 KB · Views: 481
what do you mean of the tops? there is a pic up there.lol you mean up close?

hope this helps
 

Attachments

  • 577.jpg
    35.3 KB · Views: 486
will also sell the heads seperatly for 500.00 plus the ride
 
it was 3690825, which the number came back to a m.p 12:1 piston
 
Would you be intereseted in shipping. Where are you at ? My zip is 54484 .


i have no problem shipping it if you set it all up.( you calling the shipping place. do you want engine/ trans/heads and everything? or what do you want?
 
mudpup, if you are serious, i am heading to bad axe michigan on wensday night, and could bring it that far for you to meet me. i would just charge you like 40 bucks for gas
 
well, i forgot to mark this as not for sale any longer, as i just located and picking up a 72 dart in the morning for this powerplant to go into. sorry




mods, please delete
 
Status
Not open for further replies.
-
Back
Top