63 Fury for 68 GTS 383

[68383GTS]

I am wanting a 63 Fury,Savoy,68-71 Charger willing to trade my 68 "H" code 4 speed GTS.
36,000 mile 3 owner car original 40 + year old paint.I know the history of the car back to day one.Fender tag,buildsheet,50 photos from 1968-1976 or so.Many new parts 8K includung engine and I have most of the reciepts.The transmiision,radiator,and rear end are all original.1967 383 with 425 HP.Will trade the GTS with or without the engine.Will trade for a project or a driver.I am located near Peoria,IL

What do you have?

 

[68383GTS]

New parts,front ujoint,rear ujoint,fuel tank,fuel tank sending unit with 3/8 pick up,fuel filter,3/8 fuel line the length of the car,rear brake wheels cyclinders,rear brake hardware,rear brake shoes 11 inch,rear brake drums 11 inch,all stainless steel brake line through out the car,master cylinder,front 10 inch brake rotors big bolt pattern,front brake pads,front brake hoses,A arms big ball joint,Yukon axles big bolt pattern,rear window seal,front bumper rechromed,rear bumper rechromed,tail light bezels rechromed,hood inserts rechromed,PST front end deluxe rebuild kit,front drag shocks,rear shocks,eddy single plain intake,9.5 pistons,452 heads from RHS,push rods,rocker arms,rocker armshafts,recon rods,recon crank,all new engine gaskets,HV oil pump,milodon 7qt pan,TTI headers,mopar mini starter,flywheel,water pumporiginal radiator tested and flushed,BFG 325X15 drag radials on the rear,firestone 14inch tires on front,lug nuts front and rear,shifting rods,shifter mech, clutch,MSD dist,MSD 6AL,MSD coil,Taylor 10mm wires,Tach,oil gauge,water temp gauge, and a few other thing I am sure I forgot about.I have 350 miles on the new engine.

 

[68383GTS]

Nobody ?????

 

[1968FormulaS340]

You need to bite the bullet and get those 1/4s fixed.

I bet if you did that, and got some hub caps and redlines on steel wheels……. It would almost pay for its self.

 

[clutch]

You got that right 68formula,those cars bring good money when they are close to stock!

 

[pettybludart]

Yes I agree,something needs to be done to fill in the wells.Other than the wheelwells,very nice!

 

[Longgone]

You need to bite the bullet and get those 1/4s fixed.

I bet if you did that, and got some hub caps and redlines on steel wheels……. It would almost pay for its self.

Absolutely, new 1/4`s would more than pay for themselves. I believe you would see 25-50% more value out of the car.

 

[68383GTS]

I have thought of pulling the engine and building a more stock engine with manifolds.I just do not like the TTI headers they do not fit well with a 383 4 speed.And putting on some AMD rear quarters........

 

[OneOfMany]

PM sent.

Grant

 

[68383GTS]

No one with a 62 - 72 B Body or a 70 - 74 E body out there? I will let it go less engine also.

 

[68383GTS]

Here is the car only a day or so old....